[asterisk-users] S110M not working

[Shaun Ruffell]

On 11/16/10 12:55 PM, Noah Miller wrote:
>> Hi.  FXS cards use FXO signalling, and vice versa.  Think of it this way:
>> FXS cards want to look like a CO when talking to stations, and FXO cards
>> want to look like a phone when talking to a CO.
>
> Thanks, Barry.  I am aware of this.  You'll notice in the config line
> that I used fxo signalling.
>
> I'm just thinking that the failure that dahdi_scan see may be because
> the s110 isn't getting power.
>

If you see "FAILED" in dahdi_scan for the FXS port, then most likely 
there will be some indication of what actually failed in the kernel log. 
  Is there anything in dmesg?

Cheers,
Shaun

-- 
Shaun Ruffell
Digium, Inc. | Linux Kernel Developer
445 Jan Davis Drive NW - Huntsville, AL 35806 - USA
Check us out at: www.digium.com & www.asterisk.org