[asterisk-users] [Dahdi] "DAHDI_CHANCONFIG failed on channel 1"?

Vincent codecomplete at free.fr
Wed May 26 10:30:08 CDT 2010


On Wed, 26 May 2010 17:17:08 +0200, Vincent <codecomplete at free.fr>
wrote:
>	I'm trying to install Dahdi through source code on a Fedora 13 host
>to use an OpenVox PCI card with a single FXO port, but dahdi_cfg -vv
>isn't happy.

More information, as I investigate:

# vi /etc/modprobe.d/dahdi.blacklist.conf 
#blacklist wct4xxp
#blacklist wcte12xp
#blacklist wct1xxp
#blacklist wcte11xp
#blacklist wctdm24xxp
#blacklist wcfxo
blacklist wctdm
#blacklist wctc4xxp
#blacklist wcb4xxp

# /etc/init.d/dahdi stop
Unloading DAHDI hardware modules: done

# /etc/init.d/dahdi start
Loading DAHDI hardware modules:
  wctdm:  [  OK  ]

/usr/share/dahdi/waitfor_xpds: Missing astribank_is_starting
No hardware timing source found in /proc/dahdi, loading dahdi_dummy
Running dahdi_cfg:  DAHDI_CHANCONFIG failed on channel 1: No such
device or address (6)
[FAILED]




More information about the asterisk-users mailing list