[asterisk-users] nortel meridian question

[Dale Noll]

Jerry Geis wrote:
> Hi all,
> 
> I have asterisk 1.4.26 (and I tried 1.4.29) connected PRI all 23 lines 
> and for the
> most part everything works. Dialing out on 23 lines to phones works fine.
> 
> I have to use the Local channel to call the intercom system (from call 
> files).
> If I only call 1 intercom system at a time so it uses DAHDI/1 everything 
> seems to
> work as I can call all 8 intercom systems and play a message.
> 
> The issue comes when I wish to dial all 8 intercom systems at the same time.
> The only one that works is what every system I am calling on DAHDI/1 all
> other fail.
> 
> The nortel switch gives "Cause #63" which I think is just a generic error.
> The dial looks correct in the nortel logs.
> 
> Any thoughts on the issue here?
> 
> Jerry
> 


My first thought would be to check the configuration of the individual 
trunk members on the Nortel side.  In particular TGAR, NCOS and CLS. It 
sounds like there is a difference between member 1 and all the other 
members.

In ld 20, do a tnb on each trunk on that pri.

Dale