[asterisk-users] DAHDI and ESXi

[Alec Davis]

The following link may be a suitable workaround

How do I change the type of line from E1 to T1/J1 without using jumpers?
http://kb.digium.com/entry/121/

Alec Davis 

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Conor McTernan
Sent: Thursday, 20 May 2010 7:09 p.m.
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] DAHDI and ESXi

Does anybody have any experience of running Asterisk with DAHDI on ESXi?

I am running Asterisk 1.4 with DAHDI 2.3 on ESXi 4.0 alongside a TE220 card.
My asterisk install can see the card, but no matter what I do with the
jumpers it remains in E1 mode. I have tested the card in another machine, in
a non-virtualized setup and it works correctly (i.e. dahdi_scan reports the
card as being in T1 mode).

The issue appears to be with ESX, but I cannot understand why it would be
ignoring (or even changing) the jumper settings. Has anyone else used any
Digium cards in a virtualized environment.

I am running all this on a Xeon E5506 so the PCI passthrough will work.

Any ideas or comments are much appreciated.

Thank you,

Conor

--
_____________________________________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com -- New to
Asterisk? Join us for a live introductory webinar every Thurs:
               http://www.asterisk.org/hello

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users