[asterisk-users] JNET's qozap, dahdi and PCI-E Quad

[Olivier]

Hi,

I'm trying to dial from one Asterisk box to a Patton 4638 BRI gateway.
I'm only getting this :
[May  8 15:08:24] WARNING[16797]: app_dial.c:1547 dial_exec_full: Unable to
create channel of type 'DAHDI' (cause 0 - Unknown)

My setup is :
Asterisk 1.6.1.18
libpri 1.4.10.2
1 Junghanns QuadBRI PCI-E express with :
- driver
http://webservices.jnetdns.de/~junghanns.net/downloads/jnet-dahdi-drivers-1.0.1.tar.gz
- every jumper set to TE mode


When typing "pri show spans", Asterisk replies nothing :
brs-dev*CLI> pri show spans
brs-dev*CLI> pri show version
libpri version: 1.4.10.2
brs-dev*CLI> dahdi show version
DAHDI Version: 2.3.0 Echo Canceller: KB1

Each LED is green but dahdi_scan says :
# dahdi_scan
[1]
active=yes
alarms=OK
description=quadBRI PCI ISDN Card 1 Span 1 [TE] (ca
name=ztqoz/1/1
manufacturer=
devicetype=
location=
basechan=1
totchans=3
irq=0
type=digital-
syncsrc=0
lbo=399-533 feet (DSX-1)
coding_opts=AMI
framing_opts=CCS
coding=AMI
framing=CCS


1. Is this syncsrc=0 normal (we're in TE mode) ?
2. Am I correct to hope "pri show spans" to display something ?
3. Suggestions ?

Regards
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100508/cefb7b07/attachment.htm