Hi,<br><br>I'm trying to dial from one Asterisk box to a Patton 4638 BRI gateway.<br>I'm only getting this :<br>[May 8 15:08:24] WARNING[16797]: app_dial.c:1547 dial_exec_full: Unable to create channel of type 'DAHDI' (cause 0 - Unknown)<br>
<br>My setup is :<br>Asterisk 1.6.1.18<br>libpri 1.4.10.2<br>1 Junghanns QuadBRI PCI-E express with :<br>- driver <a href="http://webservices.jnetdns.de/~junghanns.net/downloads/jnet-dahdi-drivers-1.0.1.tar.gz">http://webservices.jnetdns.de/~junghanns.net/downloads/jnet-dahdi-drivers-1.0.1.tar.gz</a><br>
- every jumper set to TE mode<br><br><br>When typing "pri show spans", Asterisk replies nothing :<br>brs-dev*CLI> pri show spans<br>brs-dev*CLI> pri show version<br>libpri version: 1.4.10.2<br>brs-dev*CLI> dahdi show version<br>
DAHDI Version: 2.3.0 Echo Canceller: KB1<br><br>Each LED is green but dahdi_scan says :<br># dahdi_scan<br>[1]<br>active=yes<br>alarms=OK<br>description=quadBRI PCI ISDN Card 1 Span 1 [TE] (ca<br>name=ztqoz/1/1<br>manufacturer=<br>
devicetype=<br>location=<br>basechan=1<br>totchans=3<br>irq=0<br>type=digital-<br>syncsrc=0<br>lbo=399-533 feet (DSX-1)<br>coding_opts=AMI<br>framing_opts=CCS<br>coding=AMI<br>framing=CCS<br><br><br>1. Is this syncsrc=0 normal (we're in TE mode) ?<br>
2. Am I correct to hope "pri show spans" to display something ?<br>3. Suggestions ?<br><br>Regards<br><br>