[asterisk-users] Not hearing Telco Operator messages

[Robert Grignon]

chan_dahdi.conf:
=================================================
;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
;autogenrated on 2009-12-04
;Dahdi Channels Configurations 
;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak
 
[trunkgroups]
 
[channels]
context=default
usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
relaxdtmf=yes
rxgain=3.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
 
;Sangoma A108 port 1 [slot:4 bus:8 span:1] <wanpipe1>
switchtype=national
context=from-xo-nvfleetone3
group=2
echocancel=yes
signalling=pri_cpe
channel =>1-23
 
;Sangoma A108 port 2 [slot:4 bus:8 span:2] <wanpipe2>
context=from-xo-transp154760dl
group=1
echocancel=yes
signalling=em_w
channel => 25-48
 
 
/etc/dahdi/system.conf
=====================================================
#autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
#autogenrated on 2009-12-04
#Dahdi Channels Configurations 
#For detailed Dahdi options, view /etc/dahdi/system.conf.bak
loadzone=us
defaultzone=us
 
#Sangoma A108 port 1 [slot:4 bus:8 span:1] <wanpipe1>
span=1,0,0,esf,b8zs
bchan=1-23
echocanceller=mg2,1-23
hardhdlc=24
 
#Sangoma A108 port 2 [slot:4 bus:8 span:2] <wanpipe2>
span=2,0,0,esf,b8zs
e&m=25-48
echocanceller=mg2,25-48
 
 


________________________________

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Zeeshan
Zakaria
Sent: Friday, March 26, 2010 9:25 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Not hearing Telco Operator messages



Can you post your /etc/zaptel.conf and /etc/asterisk/zapata.conf.

--
Zeeshan

	On 2010-03-26 9:06 AM, "Robert Grignon" <rgrignon at fleetone.com>
wrote:
	
	
	I have 1 PRI and 1 E&M Wink Circuit.
	 
	If I call a non working number and route it through the PRI, I
get the following:
	<Ringing>...."You have reached a non-working number....."
	 
	
	If I call a non working number and route it through the E&M Wink
Circuit, I get the following:
	<NO RINGING... DEAD AIR>
	 
	 
	A core show channels shows the state as ringing...
	 
	Is there something I have to do to get the "You have reached a
non-working number....." message to play back?
	 
	Thanks,
	 
	
	Robert

	--
	
_____________________________________________________________________
	-- Bandwidth and Colocation Provided by
http://www.api-digital.com --
	New to Asterisk? Join us for a live introductory webinar every
Thurs:
	              http://www.asterisk.org/hello
	
	asterisk-users mailing list
	To UNSUBSCRIBE or update options visit:
	  http://lists.digium.com/mailman/listinfo/asterisk-users
	

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100326/c31ee1a0/attachment.htm