[asterisk-users] how to start callerid for india

[Goke M Aruna]

Hi,

Edit your logger.conf, set messages in debug mode, make test incoming
and outgoing calls. Copy the log in message dirz3* and post.

Goke

On 3/20/10, Zeeshan Zakaria <zishanov at gmail.com> wrote:
> Does your regular phone shows callerid on this line. If the service provider
> is sending the callerid, asterisk doesn't have to do anything special to
> retrieve it.
>
> --
> Zeeshan
>
> On 2010-03-20 1:25 PM, "cool dude" <cool_dudeoflko at yahoo.co.in> wrote:
>
> i belong to india. i am making pbx using sangoma fxo card. i want that when
> ever call comes to my PSTN line i should see the no from where call is
> coming. so i have to configures chan_dahdi.conf according to my region. i
> checked dahdi.conf and in that they have mentioned for india
>
> ######################################################################################################################
> ; Hide the name part and leave just the number part of the caller ID
> ; string. Only applies to PRI channels.
> ;hidecalleridname=yes
> ;
> ; Type of caller ID signalling in use
> ;     bell     = bell202 as used in US (default)
> ;     v23      = v23 as used in the UK
> ;     v23_jp   = v23 as used in Japan
> ;     dtmf     = DTMF as used in Denmark, Sweden and Netherlands
> ;     smdi     = Use SMDI for caller ID.  Requires SMDI to be enabled
> (usesmdi).
> ;
> ;cidsignalling=v23
> ;
> ; What signals the start of caller ID
> ;     ring        = a ring signals the start (default)
> ;     polarity    = polarity reversal signals the start
> ;     polarity_IN = polarity reversal signals the start, for India,
> ;                   for dtmf dialtone detection; using DTMF.
> ;                   (see doc/India-CID.txt)
> ;
> ;cidstart=polarity
>
>
> so i edited chan_dahdi.conf  according to my region.
>
> ###############################################################################################################
> vi chan_dahdi.conf
>
> ;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
> ;autogenrated on 2010-03-18
> ;Dahdi Channels Configurations
> ;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak
>
> [trunkgroups]
>
> [channels]
> context=default
> usecallerid=yes
> hidecallerid=no
> callwaiting=yes
> usecallingpres=yes
> callwaitingcallerid=yes
> threewaycalling=yes
> transfer=yes
> canpark=yes
> cancallforward=yes
> callreturn=yes
> echocancel=yes
> echocancelwhenbridged=yes
> relaxdtmf=yes
> rxgain=0.0
> txgain=0.0
> group=1
> callgroup=1
> pickupgroup=1
> immediate=no
> ;cidstart=ring
> ;cidstart=polarity
> ;callerid=asreceived
> cidsignalling=polarity_IN
> sendcalleridafter=2
>
> ;Sangoma AU100 [slot:0 bus: span:1]  <wanpipe1>
> context=from-zaptel
> group=0
> echocancel=yes
> signalling = fxs_ks
> channel => 1
>
> context=from-zaptel
> group=0
> echocancel=yes
> signalling = fxs_ks
> channel => 2
>
> ####################################################################################################
>
> now when call comes to PSTN line i am not able to see the no. here is cli
> log
>
> *CLI>     -- Starting simple switch on 'DAHDI/1-1'
> [Mar 20 20:12:51] NOTICE[6659]: chan_dahdi.c:8692 ss_thread: Got event 18
> (Ring Begin)...
> [Mar 20 20:12:51] NOTICE[6659]: chan_dahdi.c:8692 ss_thread: Got event 17
> (Polarity Reversal)...
> [Mar 20 20:12:51] NOTICE[6659]: chan_dahdi.c:8692 ss_thread: Got event 17
> (Polarity Reversal)...
>     -- Executing [s at from-zaptel:1] Wait("DAHDI/1-1", "2") in new stack
>     -- Executing [s at from-zaptel:2] GotoIfTime("DAHDI/1-1",
> "23:59-7:59|mon-sun|*|*?closed,s,1") in new stack
>     -- Executing [s at from-zaptel:3] Dial("DAHDI/1-1", "SIP/112,60,tT") in new
> stack
>   == Using SIP RTP CoS mark 5
>     -- Called 112
>     -- SIP/112-00000000 is ringing
>   == Spawn extension (from-zaptel, s, 3) exited non-zero on 'DAHDI/1-1'
>     -- Hungup 'DAHDI/1-1'
>
> #################################################################################################
>
> plz help me out.
> ------------------------------
> Your Mail works best with the New Yahoo Optimized IE8. Get it
> NOW!<http://in.rd.yahoo.com/tagline_ie8_new/*http://downloads.yahoo.com/in/internetexplorer/>
> .
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>

-- 
Sent from my mobile device