[asterisk-users] Asterisk on MPLS VPN

[Sriram]

> 

> It is probably routing and your default gateway.  Type route and paste the

results into your reply.

 

Sorry, 172.16.0.1 is the local IP address and it is connected to the MPLS
Router whose WAN interface is 10.224.6.121.this is for first NIC. Second NIC
has a public IP. Now if I ping yahoo.com I get a reply and if I ping the
10.224.6.121 it just hangs on (no response). If I do ifup eth0 and fire ping
yahoo.com I don't get any response but I get reply on 10.224.6.121

 

My routing table :

 

[trixbox1.localdomain ~]# netstat -nr

Kernel IP routing table

Destination     Gateway         Genmask         Flags   MSS Window  irtt
Iface

203.234.82.90   0.0.0.0          255.255.255.224 U         0 0          0
eth0

172.16.0.0      0.0.0.0         255.255.255.0    U         0 0          0
eth1

169.254.0.0     0.0.0.0         255.255.0.0      U         0 0          0
eth0

0.0.0.0         203.234.82.91   0.0.0.0          UG        0 0          0
eth0 

 

This could be your problem as well "*the first NIC (eth0) has IP of

172.16.0.1 and is connected to router with WAN IP: 10.18.6.254 , the second

IP is 203.234.82.98 (eth1). i want to have the internet access to this

machine at all times as i need to pull out reports etc*."

 

Maybe you were in a rush or I am non reading that right, but I don't really

get the impression that you understand networking.

 

Does any of it work with one NIC up?  You don't really say what works and

what doesn't or what does.

 

Though not expert I understand networking. So request you to please guide me


 

Thanks

Sriram

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100313/a2b0217f/attachment.htm