[asterisk-users] Uverse, Asterisk and SIP

[sean darcy]

Fred Posner wrote:
> On Mar 5, 2010, at 1:01 PM, sean darcy wrote:
> 
>> The issues are that sip doesn't work,
> 
> 
> What does "doesn't work" mean? In  / Out? Both? Do you have a sip trace?
> 
>> even though this same set up
>> worked with POTS dsl. IAX does (but gives lousy audio quality) so I
>> don't believe all udp ports are blocked.
>>
>> ifconfig on my linux router box shows the public address. I can ssh
>> into that box from the outside. This is a dynamic address, so I use
>> Register to set the incoming ip address. As far as I can tell the
>> Register never gets to another asterisk box I can inspect.
> 
> does your sip.conf show your external ip?
> 
>> I will try setting the home router address in the office asterisk box
>> to see if that works and try a call from office to home, even though
>> it's not a long term fix.
>>
>> sean
> 
> With att uverse I set the firewall on the att router off, my internal router/firewall to get the public ip via dhcp (it will give you a public ip and not a private one), and then set the sip.conf parameters.
> 
> ---fred

And without doing anything more, it now Just Works(TM). Sunspots possibly.

sean