[asterisk-users] Anybody using TE410P on BT ISDN with DAHDI?

[Scott Stingel]

On 6/22/2010 9:44 AM, A J Stiles wrote:
> On Tuesday 22 Jun 2010, Scott Stingel wrote:
>    
>> Hi-
>> I've been going through the same upgrade process recently, and had the
>> same error (shown in your other message).  I had forgotten that the
>> equipment I was plugged in to was CPE, so I had to change my new setting
>> for that span to "NET" rather than CPE.  I notice in your old zapata
>> files that you had CPE for two spans and NET for the other two, and your
>> dahdi_chan setup is set up the same.  But I'm thinking perhaps during
>> testing you plugged a CPE on your new setup to a CPE on the other, which
>> would produce the symptoms you see.
>>      
> On the current machine, spans 1 and 2 are the ISDN exchange lines  (they go to
> the box on the wall labelled NTE2D);  span 3 is connected to an Eicon Diva
> server card for fax sending  (but that's for another day .....);  and span 4
> is available to use as though it was another exchange line  (used to be used
> for something once).  I'm not certain that span 2 actually does anything; it
> may have been turned off as a money-saving measure.  But the cable is still
> plugged in anyway.
>
> I unplugged the cables from spans 1 and 2 of the old machine, and transferred
> them to the new machine, leaving 3 and 4 alone for the time being.
>
> Next live testing I'll have to do tonight, once nobody else needs the phones.
>
>    
Yes, it sounds like you've configured it correctly, ie the same as the 
old machine, but just for fun you might try pri_net on one of the spans, 
stop and start the dahdi service and asterisk and see what happens!