[asterisk-users] Qwest PRIs

Sun Jun 13 02:12:30 CDT 2010

Ok making a little progress, but still can't get them completely up:

 pri show span 1
Primary D-channel: 24
Status: Provisioned, Down, Active
Switchtype: National ISDN
Type: CPE
Window Length: 0/7
Sentrej: 0
SolicitFbit: 0
Retrans: 0
Busy: 0
Overlap Dial: 0
Logical Channel Mapping: 0
T200 Timer: 1000
T203 Timer: 10000
T305 Timer: 30000
T308 Timer: 4000
T309 Timer: -1
T313 Timer: 4000
N200 Counter: 3
Overlap Recv: No

cat /proc/dahdi/1; cat /proc/dahdi/2
Span 1: TE4/0/1 "T4XXP (PCI) Card 0 Span 1" (MASTER) B8ZS/ESF
        CRC4 error count: 1293
        E-bit error count: 2774

           1 TE4/0/1/1 Clear (In use)
           2 TE4/0/1/2 Clear (In use)
           3 TE4/0/1/3 Clear (In use)
           4 TE4/0/1/4 Clear (In use)
           5 TE4/0/1/5 Clear (In use)
           6 TE4/0/1/6 Clear (In use)
           7 TE4/0/1/7 Clear (In use)
           8 TE4/0/1/8 Clear (In use)
           9 TE4/0/1/9 Clear (In use)
          10 TE4/0/1/10 Clear (In use)
          11 TE4/0/1/11 Clear (In use)
          12 TE4/0/1/12 Clear (In use)
          13 TE4/0/1/13 Clear (In use)
          14 TE4/0/1/14 Clear (In use)
          15 TE4/0/1/15 Clear (In use)
          16 TE4/0/1/16 Clear (In use)
          17 TE4/0/1/17 Clear (In use)
          18 TE4/0/1/18 Clear (In use)
          19 TE4/0/1/19 Clear (In use)
          20 TE4/0/1/20 Clear (In use)
          21 TE4/0/1/21 Clear (In use)
          22 TE4/0/1/22 Clear (In use)
          23 TE4/0/1/23 Clear (In use)
          24 TE4/0/1/24 HDLCFCS (In use)
Span 2: TE4/0/2 "T4XXP (PCI) Card 0 Span 2" B8ZS/ESF

          25 TE4/0/2/1 Clear (In use)
          26 TE4/0/2/2 Clear (In use)
          27 TE4/0/2/3 Clear (In use)
          28 TE4/0/2/4 Clear (In use)
          29 TE4/0/2/5 Clear (In use)
          30 TE4/0/2/6 Clear (In use)
          31 TE4/0/2/7 Clear (In use)
          32 TE4/0/2/8 Clear (In use)
          33 TE4/0/2/9 Clear (In use)
          34 TE4/0/2/10 Clear (In use)
          35 TE4/0/2/11 Clear (In use)
          36 TE4/0/2/12 Clear (In use)
          37 TE4/0/2/13 Clear (In use)
          38 TE4/0/2/14 Clear (In use)
          39 TE4/0/2/15 Clear (In use)
          40 TE4/0/2/16 Clear (In use)
          41 TE4/0/2/17 Clear (In use)
          42 TE4/0/2/18 Clear (In use)
          43 TE4/0/2/19 Clear (In use)
          44 TE4/0/2/20 Clear (In use)
          45 TE4/0/2/21 Clear (In use)
          46 TE4/0/2/22 Clear (In use)
          47 TE4/0/2/23 Clear (In use)
          48 TE4/0/2/24 Clear (In use)

cat system.conf | grep -v "#"
span=1,1,1,esf,b8zs
bchan=1-23
dchan=24

span=2,2,1,esf,b8zs
bchan=25-48
loadzone        = us
defaultzone     = us

cat chan_dahdi.conf

[trunkgroups]
trunkgroup => 1,24
spanmap => 1,1,1
spanmap => 2,1,2

[channels]
context=incoming
switchtype=national
facilityenable=no
signalling=pri_cpe
usecallerid=yes
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
canpark=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=yes
group=1
channel => 1-23

group=2
channel => 25-48

If anyone could let me know what I should be doing next.  I'm sure my issue
is:

Status: Provisioned, Down, Active

specifically the "Down" part.

Thanks

On Sat, Jun 12, 2010 at 9:04 AM, Voip Asterisk <asterisk at wideideas.com>wrote:

> BTW these were just up and running on a Cisco AS5300, so we know they work
> and Qwest has them turned up and configured correctly.  The only settings
> that were needed on the cisco was the coding and framing which is how dahdi
> is configured now.  Anyone have any idea how to mimic default cisco settings
> on dahdi/asterisk?
>
> The line card used in the cisco was the standard 4 port T1 PRI card.
>
> Thanks
>
> On Sat, Jun 12, 2010 at 7:51 AM, Voip Asterisk <asterisk at wideideas.com>wrote:
>
>> Ya i'm not even to the asterisk part yet.  I'm still trying to get dahdi
>> to bring up the PRIs without alarms.
>>
>>
>> On Sat, Jun 12, 2010 at 4:58 AM, Doug Lytle <support at drdos.info> wrote:
>>
>>> Voip Asterisk wrote:
>>> > Hi,
>>> >
>>> > I'm trying to bring up two PRIs from qwest with asterisk and dahdi.
>>> >  I'm using an OpenVox D410E and the drivers are loaded.  My
>>> > system.conf looks like this:
>>> >
>>>
>>> Google turned up this:
>>>
>>> http://www.voip-info.org/wiki/view/NFAS
>>>
>>> Doug
>>>
>>> --
>>> Ben Franklin quote:
>>>
>>> "Those who would give up Essential Liberty to purchase a little Temporary
>>> Safety, deserve neither Liberty nor Safety."
>>>
>>>
>>> --
>>> _____________________________________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>> New to Asterisk? Join us for a live introductory webinar every Thurs:
>>>               http://www.asterisk.org/hello
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>>
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100613/a8b46ee1/attachment.htm 