[asterisk-users] Wierdness in AGI file

[Richard Kenner]

Here's part of the output of running an AGI file:

    -- Playing 'degrees' (escape_digits=) (sample_offset 0)
    -- Playing 'fahrenheit' (escape_digits=) (sample_offset 0)
    -- Playing 'wx/humidity' (escape_digits=) (sample_offset 0)
    -- <DAHDI/1-1> Playing 'digits/40.ulaw' (language 'en')
    -- <DAHDI/1-1> Playing 'digits/9.ulaw' (language 'en')
    -- Playing 'percent' (escape_digits=) (sample_offset 0)
    -- Playing 'wx/winds' (escape_digits=) (sample_offset 0)
    -- <DAHDI/1-1> Playing 'digits/5.ulaw' (language 'en')
    -- Playing 'miles-per-hour' (escape_digits=) (sample_offset 0)
    -- Playing 'barometric' (escape_digits=) (sample_offset 0)
    -- Playing 'pressure' (escape_digits=) (sample_offset 0)
    -- <DAHDI/1-1> Playing 'digits/20.ulaw' (language 'en')
    -- <DAHDI/1-1> Playing 'digits/9.ulaw' (language 'en')
    -- Playing 'wx/point' (escape_digits=) (sample_offset 0)
    -- <DAHDI/1-1> Playing 'digits/9.ulaw' (language 'en')
    -- <DAHDI/1-1> Playing 'digits/6.ulaw' (language 'en')
    -- Playing 'wx/inches' (escape_digits=) (sample_offset 0)
    -- Playing 'wx/dew-point' (escape_digits=) (sample_offset 0)
    -- <DAHDI/1-1> Playing 'digits/30.ulaw' (language 'en')
    -- <DAHDI/1-1> Playing 'digits/8.ulaw' (language 'en')
    -- Playing 'degrees' (escape_digits=) (sample_offset 0)
    -- Playing 'fahrenheit' (escape_digits=) (sample_offset 0)
    -- Playing 'visibility' (escape_digits=) (sample_offset 0)
    -- <DAHDI/1-1> Playing 'digits/10.ulaw' (language 'en')
    -- Playing 'miles' (escape_digits=) (sample_offset 0)
    -- AGI Script Executing Application: (SayText) Options: (sunrise . 6 58  A M )

Once it played "wx/winds", it just read numbers and didn't play any of
the other files.  I've seen this before and it later goes away. But
restarting Asterisk didn't do it.  Any ideas what's going on?