[asterisk-users] Dahdi install gone wrong

[Todd Reese]

  They are FXO modules and yes, the lines are coming in from the telco.

On 8/23/2010 12:05 PM, Doug Dawson wrote:
>
> The card you installed has FXO or FXS modules in it ????? are you 
> getting your lines directly from the telco co???
>
>
> Doug D
>
>
> On Mon 23/08/10 8:37 AM , Cassius Smith cassius at cassius.org sent:
>
>     * -----Original Message-----
>     * From: Todd Reese <treese65 at gmail.com <mailto:treese65 at gmail.com>>
>     * Reply-to: Asterisk Users Mailing List - Non-Commercial
>     Discussion <asterisk-users at lists.digium.com
>     <mailto:asterisk-users at lists.digium.com>>
>     * To: asterisk-users at lists.digium.com
>     <mailto:asterisk-users at lists.digium.com>
>     * Subject: [asterisk-users] Dahdi install gone wrong
>     * Date: Mon, 23 Aug 2010 10:26:58 -0400
>     *
>     * Hi All,
>     *
>     *
>     * I've got a project installing a Digium TDM800P card with 8 FXO's
>     in an
>     * Asterisk box.
>     *
>     *
>     * The computer is running Slackware 13.1 and I've installed the
>     current
>     * Dahdi and Asterisk 1.6.2.11.
>     *
>     *
>     * I've installed several boxes that are pure VOIP but, I haven't
>     installed
>     * a Dahdi interface and I'm stumped. I've got it to the point of
>     Dahdi
>     * seeing the card and Asterisk recognizing dahdi but, I can't see
>     any
>     * channels for the calls to come in on.
>     *
>     * I've had to borrow files from an old config of Trixbox (the
>     machine was
>     * underpowered) to get to the point where I am in my setup.
>     *
>     * I would like to inquire some help from the group to get me up
>     and
>     * receiving calls on the card.
>     *
>     *
>     * Regards,
>     *
>     * Todd Reese
>     *
>     * Include:
>     *
>     *
>     * ============chan_dahdi.conf==========
>     *
>     *
>     * ; Configuration file
>     *
>     * [trunkgroups]
>     *
>     * [channels]
>     *
>     * language=en
>     * context=from-zaptel
>     * signalling=fxs_ks
>     * rxwink=300 ; Atlas seems to use long (250ms) winks
>     * ;
>     * ; Whether or not to do distinctive ring detection on FXO lines
>     * ;
>     * ;usedistinctiveringdetection=yes
>     *
>     * usecallerid=yes
>     * hidecallerid=no
>     * callwaiting=yes
>     * usecallingpres=yes
>     * callwaitingcallerid=yes
>     * threewaycalling=yes
>     * transfer=yes
>     * cancallforward=yes
>     * callreturn=yes
>     * echocancel=yes
>     * echocancelwhenbridged=no
>     * ;echotraining=800
>     * rxgain=0.0
>     * txgain=0.0
>     * group=0
>     * callgroup=1
>     * pickupgroup=1
>     * immediate=no
>     *
>     * ;faxdetect=both
>     * faxdetect=incoming
>     * ;faxdetect=outgoing
>     * ;faxdetect=no
>     *
>     * ;Include setup-pstn configs
>     * #include dahdi-channels.conf
>     *
>     * group=1
>     *
>     * ;Include PBXconfig configs
>     * #include chan_dahdi_additional.conf
>     *
>     *
>     *
>     * ============dahdi-channels.conf=============
>     *
>     * ; Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 18
>     20:25:02 2010
>     * ; If you edit this file and execute /usr/sbin/dahdi_genconf
>     again,
>     * ; your manual changes will be LOST.
>     * ; Dahdi Channels Configurations (chan_dahdi.conf)
>     * ;
>     * ; This is not intended to be a complete chan_dahdi.conf. Rather,
>     it is
>     * intended
>     * ; to be #include-d by /etc/chan_dahdi.conf that will include the
>     global
>     * settings
>     * ;
>     *
>     * ; Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
>     * ;;; line="1 WCTDM/0/0 FXSKS (SWEC: MG2)"
>     * signalling=fxs_ks
>     * callerid=asreceived
>     * group=0
>     * context=from-pstn
>     * channel => 1
>     * callerid=
>     * group=
>     * context=default
>     *
>     * ;;; line="2 WCTDM/0/1 FXSKS (SWEC: MG2)"
>     * signalling=fxs_ks
>     * callerid=asreceived
>     * group=0
>     * context=from-pstn
>     * channel => 2
>     * callerid=
>     * group=
>     * context=default
>     *
>     * ;;; line="3 WCTDM/0/2 FXSKS (SWEC: MG2)"
>     * signalling=fxs_ks
>     * callerid=asreceived
>     * group=0
>     * context=from-pstn
>     * channel => 3
>     * callerid=
>     * group=
>     * context=default
>     *
>     * ;;; line="4 WCTDM/0/3 FXSKS (SWEC: MG2)"
>     * signalling=fxs_ks
>     * callerid=asreceived
>     * group=0
>     * context=from-pstn
>     * channel => 4
>     * callerid=
>     * group=
>     * context=default
>     *
>     * ;;; line="5 WCTDM/0/4 FXSKS (SWEC: MG2)"
>     * signalling=fxs_ks
>     * callerid=asreceived
>     * group=0
>     * context=from-pstn
>     * channel => 5
>     * callerid=
>     * group=
>     * context=default
>     *
>     * ;;; line="6 WCTDM/0/5 FXSKS (SWEC: MG2)"
>     * signalling=fxs_ks
>     * callerid=asreceived
>     * group=0
>     * context=from-pstn
>     * channel => 6
>     * callerid=
>     * group=
>     * context=default
>     *
>     * ;;; line="7 WCTDM/0/6 FXSKS (SWEC: MG2)"
>     * signalling=fxs_ks
>     * callerid=asreceived
>     * group=0
>     * context=from-pstn
>     * channel => 7
>     * callerid=
>     * group=
>     * context=default
>     *
>     * ;;; line="8 WCTDM/0/7 FXSKS (SWEC: MG2)"
>     * signalling=fxs_ks
>     * callerid=asreceived
>     * group=0
>     * context=from-pstn
>     * channel => 8
>     * callerid=
>     * group=
>     * context=default
>     *
>     *
>     * =====system.conf=============
>     *
>     *
>     * # Autogenerated by /usr/sbin/dahdi_genconf on Sun Aug 22
>     19:34:02 2010
>     * # If you edit this file and execute /usr/sbin/dahdi_genconf
>     again,
>     * # your manual changes will be LOST.
>     * # Dahdi Configuration File
>     * #
>     * # This file is parsed by the Dahdi Configurator, dahdi_cfg
>     * #
>     * # Global data
>     *
>     * loadzone = us
>     * defaultzone = us
>     *
>     * # Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
>     * fxsks=1
>     * #echocanceller=mg2,1
>     * fxsks=2
>     * #echocanceller=mg2,2
>     * fxsks=3
>     * #echocanceller=mg2,3
>     * fxsks=4
>     * #echocanceller=mg2,4
>     * fxsks=5
>     * #echocanceller=mg2,5
>     * fxsks=6
>     * #echocanceller=mg2,6
>     * fxsks=7
>     * #echocanceller=mg2,7
>     * fxsks=8
>     * #echocanceller=mg2,8
>
>
>     Can you include the germane part of the dialplan also?
>
>
>
>     -- 
>     _____________________________________________________________________
>     -- Bandwidth and Colocation Provided by http://www.api-digital.com
>     <%3Ca%20href=>">http://www.api-digital.com --
>     New to Asterisk? Join us for a live introductory webinar every Thurs:
>     http://www.asterisk.org/hello
>     <%3Ca%20href=>">http://www.asterisk.org/hello
>
>     asterisk-users mailing list
>     To UNSUBSCRIBE or update options visit:
>     http://lists.digium.com/mailman/listinfo/asterisk-users
>     <%3Ca%20href=>">http://lists.digium.com/mailman/listinfo/asterisk-users
>
>
> ------------------------------------------------------------------------
> Msg sent via High Desert Internet Webmail - http://www.hdiss.net

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100823/c63ea875/attachment.htm