[asterisk-users] Dahdi install gone wrong

[Doug Dawson]

 The card you installed has FXO or FXS modules in it ????? are you getting
your lines directly from the telco co???

 Doug D

 On Mon 23/08/10 8:37 AM , Cassius Smith cassius at cassius.org sent:
  * -----Original Message-----
 * From: Todd Reese 
 * Reply-to: Asterisk Users Mailing List - Non-Commercial
 Discussion 
 * To: asterisk-users at lists.digium.com [3]
 * Subject: [asterisk-users] Dahdi install gone wrong
 * Date: Mon, 23 Aug 2010 10:26:58 -0400
 * 
 * Hi All,
 * 
 * 
 * I've got a project installing a Digium TDM800P card with 8 FXO's
 in an 
 * Asterisk box.
 * 
 * 
 * The computer is running Slackware 13.1 and I've installed the
 current 
 * Dahdi and Asterisk 1.6.2.11.
 * 
 * 
 * I've installed several boxes that are pure VOIP but, I haven't
 installed 
 * a Dahdi interface and I'm stumped. I've got it to the point of
 Dahdi 
 * seeing the card and Asterisk recognizing dahdi but, I can't see
 any 
 * channels for the calls to come in on.
 * 
 * I've had to borrow files from an old config of Trixbox (the
 machine was 
 * underpowered) to get to the point where I am in my setup.
 * 
 * I would like to inquire some help from the group to get me up
 and 
 * receiving calls on the card.
 * 
 * 
 * Regards,
 * 
 * Todd Reese
 * 
 * Include:
 * 
 * 
 * ============chan_dahdi.conf==========
 * 
 * 
 * ; Configuration file
 * 
 * [trunkgroups]
 * 
 * [channels]
 * 
 * language=en
 * context=from-zaptel
 * signalling=fxs_ks
 * rxwink=300 ; Atlas seems to use long (250ms) winks
 * ;
 * ; Whether or not to do distinctive ring detection on FXO lines
 * ;
 * ;usedistinctiveringdetection=yes
 * 
 * usecallerid=yes
 * hidecallerid=no
 * callwaiting=yes
 * usecallingpres=yes
 * callwaitingcallerid=yes
 * threewaycalling=yes
 * transfer=yes
 * cancallforward=yes
 * callreturn=yes
 * echocancel=yes
 * echocancelwhenbridged=no
 * ;echotraining=800
 * rxgain=0.0
 * txgain=0.0
 * group=0
 * callgroup=1
 * pickupgroup=1
 * immediate=no
 * 
 * ;faxdetect=both
 * faxdetect=incoming
 * ;faxdetect=outgoing
 * ;faxdetect=no
 * 
 * ;Include setup-pstn configs
 * #include dahdi-channels.conf
 * 
 * group=1
 * 
 * ;Include PBXconfig configs
 * #include chan_dahdi_additional.conf
 * 
 * 
 * 
 * ============dahdi-channels.conf=============
 * 
 * ; Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 18
 20:25:02 2010
 * ; If you edit this file and execute /usr/sbin/dahdi_genconf
 again,
 * ; your manual changes will be LOST.
 * ; Dahdi Channels Configurations (chan_dahdi.conf)
 * ;
 * ; This is not intended to be a complete chan_dahdi.conf. Rather,
 it is 
 * intended
 * ; to be #include-d by /etc/chan_dahdi.conf that will include the
 global 
 * settings
 * ;
 * 
 * ; Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
 * ;;; line="1 WCTDM/0/0 FXSKS (SWEC: MG2)"
 * signalling=fxs_ks
 * callerid=asreceived
 * group=0
 * context=from-pstn
 * channel => 1
 * callerid=
 * group=
 * context=default
 * 
 * ;;; line="2 WCTDM/0/1 FXSKS (SWEC: MG2)"
 * signalling=fxs_ks
 * callerid=asreceived
 * group=0
 * context=from-pstn
 * channel => 2
 * callerid=
 * group=
 * context=default
 * 
 * ;;; line="3 WCTDM/0/2 FXSKS (SWEC: MG2)"
 * signalling=fxs_ks
 * callerid=asreceived
 * group=0
 * context=from-pstn
 * channel => 3
 * callerid=
 * group=
 * context=default
 * 
 * ;;; line="4 WCTDM/0/3 FXSKS (SWEC: MG2)"
 * signalling=fxs_ks
 * callerid=asreceived
 * group=0
 * context=from-pstn
 * channel => 4
 * callerid=
 * group=
 * context=default
 * 
 * ;;; line="5 WCTDM/0/4 FXSKS (SWEC: MG2)"
 * signalling=fxs_ks
 * callerid=asreceived
 * group=0
 * context=from-pstn
 * channel => 5
 * callerid=
 * group=
 * context=default
 * 
 * ;;; line="6 WCTDM/0/5 FXSKS (SWEC: MG2)"
 * signalling=fxs_ks
 * callerid=asreceived
 * group=0
 * context=from-pstn
 * channel => 6
 * callerid=
 * group=
 * context=default
 * 
 * ;;; line="7 WCTDM/0/6 FXSKS (SWEC: MG2)"
 * signalling=fxs_ks
 * callerid=asreceived
 * group=0
 * context=from-pstn
 * channel => 7
 * callerid=
 * group=
 * context=default
 * 
 * ;;; line="8 WCTDM/0/7 FXSKS (SWEC: MG2)"
 * signalling=fxs_ks
 * callerid=asreceived
 * group=0
 * context=from-pstn
 * channel => 8
 * callerid=
 * group=
 * context=default
 * 
 * 
 * =====system.conf=============
 * 
 * 
 * # Autogenerated by /usr/sbin/dahdi_genconf on Sun Aug 22
 19:34:02 2010
 * # If you edit this file and execute /usr/sbin/dahdi_genconf
 again,
 * # your manual changes will be LOST.
 * # Dahdi Configuration File
 * #
 * # This file is parsed by the Dahdi Configurator, dahdi_cfg
 * #
 * # Global data
 * 
 * loadzone = us
 * defaultzone = us
 * 
 * # Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
 * fxsks=1
 * #echocanceller=mg2,1
 * fxsks=2
 * #echocanceller=mg2,2
 * fxsks=3
 * #echocanceller=mg2,3
 * fxsks=4
 * #echocanceller=mg2,4
 * fxsks=5
 * #echocanceller=mg2,5
 * fxsks=6
 * #echocanceller=mg2,6
 * fxsks=7
 * #echocanceller=mg2,7
 * fxsks=8
 * #echocanceller=mg2,8

 Can you include the germane part of the dialplan also?

 -- 
 _____________________________________________________________________
 -- Bandwidth and Colocation Provided by http://www.api-digital.com
[4]">http://www.api-digital.com --
 New to Asterisk? Join us for a live introductory webinar every Thurs:
 http://www.asterisk.org/hello [5]">http://www.asterisk.org/hello

 asterisk-users mailing list
 To UNSUBSCRIBE or update options visit:
 http://lists.digium.com/mailman/listinfo/asterisk-users
[6]">http://lists.digium.com/mailman/listinfo/asterisk-users

-------------------------
Msg sent via High Desert Internet Webmail - http://www.hdiss.net

Links:
------
[1] mailto:treese65 at gmail.com
[2] mailto:asterisk-users at lists.digium.com
[3] mailto:asterisk-users at lists.digium.com
[4] http://www.api-digital.com
[5] http://www.asterisk.org/hello
[6] http://lists.digium.com/mailman/listinfo/asterisk-users
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100823/9f4071c1/attachment.htm