[asterisk-users] Dahdi install gone wrong

[Todd Reese]

  Hi All,


I've got a project installing a Digium TDM800P card with 8 FXO's in an 
Asterisk box.


The computer is running Slackware 13.1 and I've installed the current 
Dahdi and Asterisk 1.6.2.11.


I've installed several boxes that are pure VOIP but, I haven't installed 
a Dahdi interface and I'm stumped.  I've got it to the point of Dahdi 
seeing the card and Asterisk recognizing dahdi but, I can't see any 
channels for the calls to come in on.

I've had to borrow files from an old config of Trixbox (the machine was 
underpowered) to get to the point where I am in my setup.

I would like to inquire some help from the group to get me up and 
receiving calls on the card.


Regards,

Todd Reese

Include:


============chan_dahdi.conf==========


; Configuration file

[trunkgroups]

[channels]

language=en
context=from-zaptel
signalling=fxs_ks
rxwink=300              ; Atlas seems to use long (250ms) winks
;
; Whether or not to do distinctive ring detection on FXO lines
;
;usedistinctiveringdetection=yes

usecallerid=yes
hidecallerid=no
callwaiting=yes
usecallingpres=yes
callwaitingcallerid=yes
threewaycalling=yes
transfer=yes
cancallforward=yes
callreturn=yes
echocancel=yes
echocancelwhenbridged=no
;echotraining=800
rxgain=0.0
txgain=0.0
group=0
callgroup=1
pickupgroup=1
immediate=no

;faxdetect=both
faxdetect=incoming
;faxdetect=outgoing
;faxdetect=no

;Include setup-pstn configs
#include dahdi-channels.conf

group=1

;Include PBXconfig configs
#include chan_dahdi_additional.conf



============dahdi-channels.conf=============

; Autogenerated by /usr/sbin/dahdi_genconf on Wed Aug 18 20:25:02 2010
; If you edit this file and execute /usr/sbin/dahdi_genconf again,
; your manual changes will be LOST.
; Dahdi Channels Configurations (chan_dahdi.conf)
;
; This is not intended to be a complete chan_dahdi.conf. Rather, it is 
intended
; to be #include-d by /etc/chan_dahdi.conf that will include the global 
settings
;

; Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
;;; line="1 WCTDM/0/0 FXSKS  (SWEC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 1
callerid=
group=
context=default

;;; line="2 WCTDM/0/1 FXSKS  (SWEC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 2
callerid=
group=
context=default

;;; line="3 WCTDM/0/2 FXSKS  (SWEC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 3
callerid=
group=
context=default

;;; line="4 WCTDM/0/3 FXSKS  (SWEC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 4
callerid=
group=
context=default

;;; line="5 WCTDM/0/4 FXSKS  (SWEC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 5
callerid=
group=
context=default

;;; line="6 WCTDM/0/5 FXSKS  (SWEC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 6
callerid=
group=
context=default

;;; line="7 WCTDM/0/6 FXSKS  (SWEC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 7
callerid=
group=
context=default

;;; line="8 WCTDM/0/7 FXSKS  (SWEC: MG2)"
signalling=fxs_ks
callerid=asreceived
group=0
context=from-pstn
channel => 8
callerid=
group=
context=default


=====system.conf=============


# Autogenerated by /usr/sbin/dahdi_genconf on Sun Aug 22 19:34:02 2010
# If you edit this file and execute /usr/sbin/dahdi_genconf again,
# your manual changes will be LOST.
# Dahdi Configuration File
#
# This file is parsed by the Dahdi Configurator, dahdi_cfg
#
# Global data

loadzone        = us
defaultzone     = us

# Span 1: WCTDM/0 "Wildcard TDM800P Board 1" (MASTER)
fxsks=1
#echocanceller=mg2,1
fxsks=2
#echocanceller=mg2,2
fxsks=3
#echocanceller=mg2,3
fxsks=4
#echocanceller=mg2,4
fxsks=5
#echocanceller=mg2,5
fxsks=6
#echocanceller=mg2,6
fxsks=7
#echocanceller=mg2,7
fxsks=8
#echocanceller=mg2,8