[asterisk-users] Linksys/Sipura SPA-3201 FXO/FSA with Asterisk

[Jose Flores Galicia]

Hi.

On the Spa 3102 is set as Dialplan <s0:8028> on PSTN line tab, since other
way the incoming call will try to be routed to a non set extension on
[gw8028] context

Best Regards
Jose Flores Galicia
<<FloJoSe at gmail.com>>
BriefCode && Code Based Training


2010/4/8 Seann Clark <nombrandue at tsukinokage.net>

> All,
>
>
>   I am looking at a little support on this, as I haven't found it on google
> yet. I have had this work on Callweaver, but am moving to Asterisk for a
> variety of reasons. My dial plans, and everything else transferred
> perfectly, though I am not sure they are 'correct' for Asterisk 1.6.1, with
> simple things like SIP users outlined in the sip.conf file, not in the users
> file, and my dialplan syntaxes don't appear to be liked by the asterisk-gui
> program (not a big deal, was just something shiny to look at for me, to try
> to figure out a way to get this going).
>
>   What my problem is with Asterisk is my SPA-3201 is my primary voice
> gateway, as I do not own any Digium hardware, and currently do not have a
> SIP provider outside of my PBX at home. When I restart Asterisk, everything
> works perfectly. I let Asterisk sit for an hour or so, and it stops allowing
> calls to be routed into the assigned extension. I do see stuff from the
> communications, at the time the call lands on the Asterisk server:
>
>  == Using SIP RTP CoS mark 5
>  == Using SIP VRTP CoS mark 6
>
> The logic is that the SPA is registered as an extension on my system, and
> incoming calls are routed into the system VIA that extension. The dialplan
> that the SPA connects to is:
>
>
> [gw8028]
>       exten => 8028,1,Answer
>       exten => 8028,n,Set(CallerNum=${CALLERID(num)})
>       exten => 8028,n,Set(CallerName=${CALLERID(name)})
>       exten => 8028,n,Set(CDR(accountcode)="8203")
>       exten => 8028,n,Set(CDR(UserField)="POTS")
>       exten => 8028,n,Goto(from-internal,111,1)
>       exten => 8028,n,Hangup
>
>
> the 'from-internal' is my current call filtering/processing subsystem.
>
> The outbound side of this works just fine though, as well as my ATA's and
> Cisco 7960's are able to make and receive calls when this is happening. I
> can include any additional details if requested, as I don't know exactly
> what would be helpful to others with this. The SPA itself hasn't been
> changed in seven months, and is stable with Callweaver.
>
>
>
> Thanks in Advance,
> Seann Clark
>
> --
> _____________________________________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> New to Asterisk? Join us for a live introductory webinar every Thurs:
>               http://www.asterisk.org/hello
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20100409/055b5842/attachment.htm