[asterisk-users] EXTENSION_STATE Asterisk 1.6

[Danny Nicholas]

How do these extensions show up on a "core show channels verbose"?  I do my
hints like this

[internal]

-          exten => 501,hint,SIP/100

-          exten => 502,hint,DAHDI/1

-          exten => 503,hint,ZAP/1

 

you should be able to register a hint based on the cscv output.

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sriram
Sent: Wednesday, September 30, 2009 1:52 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] EXTENSION_STATE Asterisk 1.6

 

Hi 

I've a queue which has generic zap extensions (of my legacy PBX which is
connected to asterisk via cross over on span 4 ) logged in ..The legacy pbx
extensions are able to logon to queue perfect.. but Whenever a call comes in
queue the status of that extension in "queue show <queuename>" always shows
as "NOT IN USE" instead of ringing or In use as shown in a SIP extension..My
question is there anyway to register custom generic zap extensions onto the
hints and get the status via extension state command ..alternatviley how can
I show the device status as "In USE" when that legacy extension is on a call
??

 

Requesting for a help

 

Thanks

Sriram

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090930/f93174aa/attachment.htm