[asterisk-users] Today's problem: Inbound call routing

[Tzafrir Cohen]

On Thu, Oct 08, 2009 at 10:00:19PM -1000, Ben Schorr wrote:
> O.K., so AsteriskNow 1.4.26.2, FreePBX 2.6.0RC2.1  We have a Digium
> TE205P connected to a single span if ISDN PRI.  The Telco has assigned
> us two local numbers to test incoming calls.  I created an inbound route
> for one of those DID's and assigned it to one of our extensions.  Sounds
> simple enough.
> 
>  
> 
> Too simple, apparently, when I dial the number the caller gets a
> recording that it's a non-working number and this is what I see in the
> CLI:
> 
>  
> 
> Extension '8085255935' in context 'default' from '808xxxxxxx' does not
> exist.  Rejecting call on channel 0/1, span 1
> 

That is a pretty clear error message.

>  
> 
> So...other than creating the inbound route and assigning it to an
> extension I apparently have to do something else.  Any suggestions as to
> what that might be?

You manage your dialplan with FreePBX. This mailing list supports
Asterisk. I have no problem with questions about FreePBX systems. But
they should also be phrased as Asterisk questions. This is a FreePBX
question.

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir