[asterisk-users] ASTERISK and SNMP

michal kalinowski michal.kalinowski at interia.pl
Fri Nov 27 16:37:11 CST 2009


Check this command "snmpwalk -c your_community -v 1 localhost interfaces"

in my system it's looks like that:

IF-MIB::ifNumber.0 = INTEGER: 4
IF-MIB::ifIndex.1 = INTEGER: 1
IF-MIB::ifIndex.2 = INTEGER: 2
IF-MIB::ifIndex.3 = INTEGER: 3
IF-MIB::ifIndex.4 = INTEGER: 4
IF-MIB::ifDescr.1 = STRING: lo
IF-MIB::ifDescr.2 = STRING: eth0
IF-MIB::ifDescr.3 = STRING: eth1
IF-MIB::ifDescr.4 = STRING: sit0
IF-MIB::ifType.1 = INTEGER: softwareLoopback(24)
IF-MIB::ifType.2 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.3 = INTEGER: ethernetCsmacd(6)
IF-MIB::ifType.4 = INTEGER: tunnel(131)
IF-MIB::ifMtu.1 = INTEGER: 16436
IF-MIB::ifMtu.2 = INTEGER: 1500
IF-MIB::ifMtu.3 = INTEGER: 1500
IF-MIB::ifMtu.4 = INTEGER: 1480
IF-MIB::ifSpeed.1 = Gauge32: 10000000
IF-MIB::ifSpeed.2 = Gauge32: 10000000
IF-MIB::ifSpeed.3 = Gauge32: 1000000000
IF-MIB::ifSpeed.4 = Gauge32: 0
IF-MIB::ifPhysAddress.1 = STRING:
IF-MIB::ifPhysAddress.2 = STRING: 0:14:5e:32:15:70
IF-MIB::ifPhysAddress.3 = STRING: 0:14:5e:32:15:71
IF-MIB::ifPhysAddress.4 = STRING:
IF-MIB::ifAdminStatus.1 = INTEGER: up(1)
IF-MIB::ifAdminStatus.2 = INTEGER: down(2)
IF-MIB::ifAdminStatus.3 = INTEGER: up(1)
IF-MIB::ifAdminStatus.4 = INTEGER: down(2)
IF-MIB::ifOperStatus.1 = INTEGER: up(1)
IF-MIB::ifOperStatus.2 = INTEGER: down(2)
IF-MIB::ifOperStatus.3 = INTEGER: up(1)
IF-MIB::ifOperStatus.4 = INTEGER: down(2)
IF-MIB::ifLastChange.1 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.2 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.3 = Timeticks: (0) 0:00:00.00
IF-MIB::ifLastChange.4 = Timeticks: (0) 0:00:00.00
IF-MIB::ifInOctets.1 = Counter32: 37919437
IF-MIB::ifInOctets.2 = Counter32: 0
IF-MIB::ifInOctets.3 = Counter32: 1491657594
IF-MIB::ifInOctets.4 = Counter32: 0
IF-MIB::ifInUcastPkts.1 = Counter32: 335932
IF-MIB::ifInUcastPkts.2 = Counter32: 0
IF-MIB::ifInUcastPkts.3 = Counter32: 162961409
IF-MIB::ifInUcastPkts.4 = Counter32: 0
IF-MIB::ifInNUcastPkts.1 = Counter32: 0
IF-MIB::ifInNUcastPkts.2 = Counter32: 0
IF-MIB::ifInNUcastPkts.3 = Counter32: 131166
IF-MIB::ifInNUcastPkts.4 = Counter32: 0
IF-MIB::ifInDiscards.1 = Counter32: 0
IF-MIB::ifInDiscards.2 = Counter32: 0
IF-MIB::ifInDiscards.3 = Counter32: 0
IF-MIB::ifInDiscards.4 = Counter32: 0
IF-MIB::ifInErrors.1 = Counter32: 0
IF-MIB::ifInErrors.2 = Counter32: 0
IF-MIB::ifInErrors.3 = Counter32: 0
IF-MIB::ifInErrors.4 = Counter32: 0
IF-MIB::ifInUnknownProtos.1 = Counter32: 0
IF-MIB::ifInUnknownProtos.2 = Counter32: 0
IF-MIB::ifInUnknownProtos.3 = Counter32: 0
IF-MIB::ifInUnknownProtos.4 = Counter32: 0
IF-MIB::ifOutOctets.1 = Counter32: 37919437
IF-MIB::ifOutOctets.2 = Counter32: 0
IF-MIB::ifOutOctets.3 = Counter32: 3525337520
IF-MIB::ifOutOctets.4 = Counter32: 0
IF-MIB::ifOutUcastPkts.1 = Counter32: 335932
IF-MIB::ifOutUcastPkts.2 = Counter32: 0
IF-MIB::ifOutUcastPkts.3 = Counter32: 38811075
IF-MIB::ifOutUcastPkts.4 = Counter32: 0
IF-MIB::ifOutNUcastPkts.1 = Counter32: 0
IF-MIB::ifOutNUcastPkts.2 = Counter32: 0
IF-MIB::ifOutNUcastPkts.3 = Counter32: 0
IF-MIB::ifOutNUcastPkts.4 = Counter32: 0
IF-MIB::ifOutDiscards.1 = Counter32: 0
IF-MIB::ifOutDiscards.2 = Counter32: 0
IF-MIB::ifOutDiscards.3 = Counter32: 0
IF-MIB::ifOutDiscards.4 = Counter32: 0
IF-MIB::ifOutErrors.1 = Counter32: 0
IF-MIB::ifOutErrors.2 = Counter32: 0
IF-MIB::ifOutErrors.3 = Counter32: 0
IF-MIB::ifOutErrors.4 = Counter32: 0
IF-MIB::ifOutQLen.1 = Gauge32: 0
IF-MIB::ifOutQLen.2 = Gauge32: 0
IF-MIB::ifOutQLen.3 = Gauge32: 0
IF-MIB::ifOutQLen.4 = Gauge32: 0
IF-MIB::ifSpecific.1 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.2 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.3 = OID: SNMPv2-SMI::zeroDotZero
IF-MIB::ifSpecific.4 = OID: SNMPv2-SMI::zeroDotZero

here You have information about interface descryptions, status, speed,
type, etc.

BR,
Michał
2009/11/27 Mr. James W. Laferriere <babydr at baby-dragons.com>:
>        Hello Micha (& all) ,
>
> On Fri, 27 Nov 2009, michal kalinowski wrote:
>>
>> Your Digium card is for linux standard interface like eth0 (ethernet),
>> check IF-MIB.txt and OID from there.
>> BR,
>> Micha?
>
>        When doing a snmpwalk of the IF-MIB & having a (*) installed there is
> no mention of an interface associated with this card .  Now it is quite
> possible that Digium in there wisdom has added the necessary components to
> their drivers that inserts the necessary components into the IF tables thus
> allowing snmp's IF-MIB to see a known interface .
>
>        If this is the case where in the driver (or code base) might I find
> this revelation .  I'd sure like to have statistics & traps being dumped for
> this card .
>
> (*)
> 01:09.0 Communication controller: Tiger Jet Network Inc. Tiger3XX Modem/ISDN
> interface
>
>                Tia ,  JimL
>
>> 2009/11/27 mickael ropars <mropars at gmail.com>:
>>>
>>> Everuthing is working fine, but I have another question to SNMP users:
>>>
>>> There is no hardware info in the MIB.
>>>
>>> How can you do to send alarm (when one interface is down for exemple), is
>>> there no way to check its status?
>>>
>>> NB: I am using a Digium card
>>>
>>> regards
>>>
>>> Mickael
>>>
>>> 2009/11/27 mickael ropars <mropars at gmail.com>
>>>>
>>>> Hi all,
>>>>
>>>> I am currently not able to configure SNMP for asterisk, but I am not
>>>> able
>>>> to acess to the asterisk MIB (the asterisk MIB is in
>>>> /usr/share/snmp/mibs/)
>>>>
>>>>
>>>> Does somebody has an example of smnpd.conf file wich is working ?
>>>>
>>>> regards
>>>>
>>>> Mickael
>>>
>>>
>>> _______________________________________________
>>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>>
>>> asterisk-users mailing list
>>> To UNSUBSCRIBE or update options visit:
>>>   http://lists.digium.com/mailman/listinfo/asterisk-users
>>>
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>>  http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
> --
> +------------------------------------------------------------------+
> | James   W.   Laferriere | System    Techniques | Give me VMS     |
> | Network&System Engineer | 3237     Holden Road |  Give me Linux  |
> | babydr at baby-dragons.com | Fairbanks, AK. 99709 |   only  on  AXP |
> +------------------------------------------------------------------+
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



More information about the asterisk-users mailing list