[asterisk-users] Sangoma a104d and channel banks

[Grygoriy Dobrovolskyy]

2009/5/7 Jim Dickenson <dickenson at cfmc.com>

> I have * 1.6.0.9 with dahdi-linux 2.1.0.4, dahdi-tools 2.1.0.2, libpri
> 1.4.10 and wanpipe-3.4.1 running on CentOS 5.3 64bit.
>
> I have 2 ports of the a104d configured for use with PRI lines and 2 ports
> configured for use with Adtran Total Access 850 channel banks. The channel
> banks have 6 four port FXS cards in them.
>
> The PRI lines work as expected.
>
> I can call a phone connected to the channel bank and this works as
> expected.
>
> If I pick up the phone connected to the channel bank and dial a digit I
> immediately get a fast busy tone. The exceptions is that if I dial
> *7<anything> then I can dial these three keys. Nothing of much interest
> shows on the * console other then when I hang up the phone this event is
> reported.
>
> If while talking on the phone when someone calls me, I press a key on the
> phone connected to the channel bank, the person called hears a faint pop
> and
> then the pressed dtmf tone.
>
> Any ideas as to what might cause this behavior?
>
> Thanks for any ideas!
> --
> Jim Dickenson
> mailto:dickenson at cfmc.com
>
> CfMC
> http://www.cfmc.com/
>

Look if your channel bank dont have any fancy dialplan configured.
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090507/7b3f3600/attachment.htm