[asterisk-users] Can someone help me with my IAX-registration

Gavin Henry gavin.henry at gmail.com
Mon May 4 03:46:19 CDT 2009


Is your box on a public ip or via nat? If eth0 isn't the ip you set it
to bind on it will ignore it.

I mean, is your * box on an internal address?

On 02/05/2009, jonas kellens <jonas.kellens at telenet.be> wrote:
> I have connected my Asterisk-box directly to my internetconnection. I
> have disabled my firewall.
>
> Still I am unable to register with my IAX-provider. Can someone please
> point me out why I am unable to register my Asterisk to another
> Asterisk-box ?
> A RegReq is send to the other Asterisk-box but no reply is received...
> No confirm, no reject...
>
> I have tried yet several configuration in my iax.conf file.
> There is also always the "ignoring bindaddr" and "ignoring bindport"...
> which doesn't sound right.
>
> What I know from books is that when you want to connect your Asterisk to
> another Asterisk-box you need to describe this other Asterisk-box as a
> peer.
> So my iax.conf :
>
> [general]
> autokill=yes
> bindport=4569
> bindaddr=78.22.166.226 ; the IP-address I get from my ISP
>
> register => cstore:my-password at ip-of-other-iax-box
>
> [cstore]
> type=user
> trunk=yes
> context=from-other-iax-box
> disallow=all
> allow=ulaw
> allow=alaw
> allow=gsm
>
> [attractel] ; name I use in extensions.conf to contact other iax-box
> type=peer
> host=ip-address
> username=cstore ; username @ remote asterisk
> secret=my-password ; pass @ remote Asterisk
> auth=plaintext,md5
> trunk=yes
> disallow=all
> allow=ulaw
> allow=alaw
> allow=gsm
>
> IAX reload :
>
> asterisk*CLI> iax2 reload
>   == Parsing '/etc/asterisk/iax.conf': Found
> [May  2 10:34:23] NOTICE[4626]: chan_iax2.c:10124 set_config: Ignoring
> bindport on reload
> [May  2 10:34:23] NOTICE[4626]: chan_iax2.c:10183 set_config: Ignoring
> bindaddr on reload
>        > doing dnsmgr_lookup for '62.213.196.38'
>   == Parsing '/etc/asterisk/users.conf': Found
>        > doing dnsmgr_lookup for '62.213.196.38'
>   == Loaded firmware 'iaxy.bin'
>   == Parsing '/etc/asterisk/iaxprov.conf': Found
>     -- Loaded provisioning template 'default'
>
> Is ignoring bindaddr and bindport normal ?????
>
> IAX debug :
>
> Tx-Frame Retry[000] -- OSeqno: 000 ISeqno: 000 Type: IAX     Subclass:
> REGREQ
>    Timestamp: 00019ms  SCall: 13117  DCall: 00000 [62.213.196.38:4569]
>    USERNAME        : cstore
>    REFRESH         : 60
>
> Tx-Frame Retry[001] -- OSeqno: 000 ISeqno: 000 Type: IAX     Subclass:
> REGREQ
>    Timestamp: 00019ms  SCall: 13117  DCall: 00000 [62.213.196.38:4569]
>    USERNAME        : cstore
>    REFRESH         : 60
>
> Tx-Frame Retry[002] -- OSeqno: 000 ISeqno: 000 Type: IAX     Subclass:
> REGREQ
>    Timestamp: 00019ms  SCall: 13117  DCall: 00000 [62.213.196.38:4569]
>    USERNAME        : cstore
>    REFRESH         : 60
>
> IAX status :
>
> asterisk*CLI> iax2 show registry
> Host                           dnsmgr  Username    Perceived
> Refresh   State
> 62.213.196.38:4569    N           cstore      <Unregistered>       60
> Request Sent
>
> Host                           dnsmgr  Username    Perceived
> Refresh  State
> 62.213.196.38:4569    N           cstore      <Unregistered>       60
> Timeout
>
>
> Thanks for the help,
> Jonas.
>

-- 
Sent from my mobile device

http://www.suretecsystems.com/services/openldap/



More information about the asterisk-users mailing list