[asterisk-users] gpx 2000 Busy Lamp Field

[Jon Pounder]

Vieri wrote:

I see much the same except I think if you investigate further, the light 
will be green whether the phone ever registered or not.

> --- On Tue, 3/24/09, Ken Williams <ken at intermountainelectronics.com> wrote:
>
>   
>> Our work around is to lower the
>> registration expiration on the phones.
>>     
>
> Well, something's not working as "I expect it to". My GXP2000 phones have re-registration timeout of 2 minutes.
>
> In my example below, extension 4061 is unplugged (so obviously it won't re-register, ever). Meanwhile, the other GXP2000 phones keep seeing 4061 as "on-line" (green led).
> This happens with Asterisk 1.4.24.
>
> If I use Asterisk 1.2, the green LED turns red within a few seconds.
>
> My guess is that Asterisk is not sending the device state, or it's not correctly detecting that the phone has not re-registered.
>
> I might not be interpreting the "hints" logic correctly, but I suppose that if a "sip show peer" reveals that the extension is not registered (when it was before) then Asterisk should send out a message to all subscribed phones so that their BLF can be updated.
>
> As you can see below, 4061 is switched off, isn't physically online anymore, but all BLF LEDs are green.
>
> Why is this?
>
> # asterisk -rx "sip show peers" | grep 4061
> 4061/4061                  (Unspecified)    D   N   A  0        UNKNOWN         
> # asterisk -rx "sip show peer 4061"
>
>
>   * Name       : 4061
>   Secret       : <Set>
>   MD5Secret    : <Not set>
>   Context      : from-internal
>   Subscr.Cont. : <Not set>
>   Language     : en
>   AMA flags    : Unknown
>   Transfer mode: open
>   CallingPres  : Presentation Allowed, Not Screened
>   Callgroup    : 2
>   Pickupgroup  : 2
>   Mailbox      : 4061 at device
>   VM Extension : *97
>   LastMsgsSent : 0/0
>   Call limit   : 50
>   Dynamic      : Yes
>   Callerid     : "device" <4061>
>   MaxCallBR    : 384 kbps
>   Expire       : -1
>   Insecure     : no
>   Nat          : Always
>   ACL          : Yes
>   T38 pt UDPTL : No
>   CanReinvite  : No
>   PromiscRedir : No
>   User=Phone   : No
>   Video Support: No
>   Trust RPID   : No
>   Send RPID    : No
>   Subscriptions: Yes
>   Overlap dial : Yes
>   DTMFmode     : rfc2833
>   LastMsg      : 0
>   ToHost       :
>   Addr->IP     : (Unspecified) Port 0
>   Defaddr->IP  : 0.0.0.0 Port 5060
>   Reg. exten   :
>   Def. Username: 4061
>   SIP Options  : (none)
>   Codecs       : 0x2 (gsm)
>   Codec Order  : (gsm:20)
>   Auto-Framing:  No
>   Status       : UNKNOWN
>   Useragent    : Grandstream GXP2000 1.1.6.46
>   Reg. Contact : sip:4061 at 10.215.146.161:5060;transport=udp
>
> # asterisk -rx "show hints" | grep 4061
>                    4061 at ext-local           : SIP/4061&Custom:DND4  State:Idle            Watchers  1
>                 *764061 at ext-dnd-hints       : Custom:DEVDND4061     State:Idle            Watchers  0
>                 *214061 at ext-findmefollow    : Custom:FOLLOWME4061   State:Idle            Watchers  0
>
>
> PS: (I don't understand why 4061 at ext-local has "State:Idle")
>
> Thanks,
>
> Vieri
>
>
>
>       
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>
>