[asterisk-users] after install the zaptel but the rtp failed

[Grygoriy Dobrovolskyy]

type in cli Core show application meetme and read how to use it

 MeetMe([confno][,[options][,pin]]): Enters the user into a specified MeetMe
conference.



exten => 4105,n,meetme(99008664105|Ap)
>
So what conf number do you join here ? 99008664105
do you have a conf with that number ?


>
>
>
> I have compare my two different manchines,(one work OK,and another is
> failed):
> when  use "zap show channels" to see the channels status:
>  Chan Extension  Context         Language   MOH Interpret
>  pseudo            default                    default
>
> then i dial the 4105 and channels show
>  Chan Extension  Context         Language   MOH Interpret
>  pseudo            default                    default
> pseudo            default                    default
>
> then i hangup,but the channels still have two pseudo:
>   Chan Extension  Context         Language   MOH Interpret
>  pseudo            default                    default
> pseudo            default                    default
>
>
> then i try again,the Meetme didn't ctreat room anymore.
>
> and i found a strange thing :
> after i install the zaptel ,my asterisk didn't play any voice.
> i use the Playback(Nomoney):
> Executing [4105 at 4105:1] Answer("SIP/22238-08211340", "") in new stack
>     -- Executing [4105 at 4105:2] Playback("SIP/22238-08211340", "NoMoney")
> in new stack
>     -- <SIP/22238-08211340> Playing 'NoMoney' (language 'en')
> It show well but no voice!!
>
> Is it wrong in my system? thanks
>
> 2009-03-05
> ------------------------------
>  邱磊
> ------------------------------
>  *发件人：* Grygoriy Dobrovolskyy
> *发送时间：* 2009-03-04  16:30:06
> *收件人：* Asterisk Users Mailing List - Non-Commercial Discussion
> *抄送：*
> *主题：* Re: [asterisk-users] after install the zaptel but the rtp failed
>
>
> 2009/3/4 邱磊 <qiulei212 at 163.com>
>
>>  hi Grygoriy :
>> appreciate your reply ,
>> that's my cli command:
>> CLI> zap show status
>> Description                              Alarms     IRQ        bpviol
>> CRC4
>> ZTDUMMY/1 1                              UNCONFIGUR 0          0
>> 0
>>
>> Is't all right? forward your echo .
>> thanks
>>
>>
> Yes normally you should have meetme working. Paste your extensions.conf
> here (only the context with the conference) Also the config of the sip peer
> who is trying to join the conference and more cli output during that join.
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090305/dc17b2c8/attachment.htm