[asterisk-users] Portech MV-378 with Asterisk

[Marco Signorini]

Yes.
That's the correct way to do it. Placing # as a rule in callnum forces
the Portech to use the number defined in the SIP INVITE packet.

Bye.
Marco.

========================
Marco Signorini
INGEGNI Tech S.r.l.
http://www.ingegnitech.com <http://www.ingegnitechcom/>


Pascal Bruno wrote:
> Sorry for bothering you, but I got it, I just had to put # in callnum!
>
>
>
> On Sat, Jan 17, 2009 at 1:44 AM, Pascal Bruno <tipascal at gmail.com
> <mailto:tipascal at gmail.com>> wrote:
>
>     I want to dial out using the sim card.  What I did, I have used
>     the SIP channel ex:
>
>     Channel: SIP/thenumber at mv378
>
>     It shows the called is being made in the dialplan, but the number
>     I have entered does not dial, it just goes straight to the
>     specified dialplan extensions.
>
>     Then what I did, in the Lan to Mobile Table, I put * in url and
>     the number I wanted to dial in call num, then the call was made to
>     that number using the sim card properly.
>
>     I was wondering if I cannot supply the number to be dialed using
>     an asterisk call file, or do I have to put that number in the Lan
>     to Mobile table.
>
>     Any help would be appreciated.
>
>     Thanks
>
>
>
>
>
>     On Sat, Jan 17, 2009 at 12:39 AM, Pascal Bruno <tipascal at gmail.com
>     <mailto:tipascal at gmail.com>> wrote:
>
>         Marco,
>
>         The configs work fine for me.  I can receive calls with no
>         problem.  Now, were you able to dial using the sim card?  I
>         cant figure out how I can do it since asterisk doesnt have a
>         channel to place call through the portech gateway.
>
>
>

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090117/a866d42f/attachment.htm