[asterisk-users] TE121 on Asterisk

[Oguzhan Kayhan]

> On Thu, Feb 26, 2009 at 08:41:25AM +0200, Oguzhan Kayhan wrote:
>> >> Oguzhan Kayhan wrote:
>> >>> I want to change it to E1 instead of T1.
>> >>> here comes the problem.
>> >>>
>> >>
>> >> If it's anything like the older cards, there is a jumper on the card
>> >> that sets it to T1/E1
>> >>
>> >> Doug
>> >>
>> > Yes,
>> > I just noticed the jumper on the card.
>> > Thanks a lot.
>> >
>> >
>> Yes i changed the jumper to enable  E1.
>> dahdi_scan shows the following
>> [1]
>> active=yes
>> alarms=UNCONFIGURED
>> description=Wildcard TE121 Card 0
>> name=WCT1/0
>> manufacturer=Digium
>> devicetype=Wildcard TE121 with VPMADT032
>> location=PCI Bus 04 Slot 09
>> basechan=1
>> totchans=31
>> irq=17
>> type=digital-E1
>> syncsrc=0
>> lbo=0 db (CSU)/0-133 feet (DSX-1)
>> coding_opts=HDB3
>> framing_opts=CCS,CRC4
>> coding=
>> framing=
>>
>> But when i try to run dahdi_genconf i got the following error.
>>
>> 31 channels in a T1 span at /usr/local/share/perl/5.10.0/Dahdi/Span.pm
>> line 244.
>>
>> dahdi_hardware
>> 31 channels in a T1 span at /usr/local/share/perl/5.10.0/Dahdi/Span.pm
>> line 244.
>>
>>
>> What should i do about it?
>
> I believe it was resolved with:
>
>   http://svn.digium.com/view/dahdi?view=revision&revision=5626
>   http://svn.digium.com/view/dahdi/tools/trunk/xpp/perl_modules/Dahdi/Span.pm?r1=5452&r2=5626
>
> What version of the tools do you use?
>

Dahdi 2.1.0.4 not svn versions..




> --
>                Tzafrir Cohen
> icq#16849755              jabber:tzafrir.cohen at xorcom.com
> +972-50-7952406           mailto:tzafrir.cohen at xorcom.com
> http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users
>