[asterisk-users] TE121 on Asterisk

[Tzafrir Cohen]

On Thu, Feb 26, 2009 at 08:41:25AM +0200, Oguzhan Kayhan wrote:
> >> Oguzhan Kayhan wrote:
> >>> I want to change it to E1 instead of T1.
> >>> here comes the problem.
> >>>
> >>
> >> If it's anything like the older cards, there is a jumper on the card
> >> that sets it to T1/E1
> >>
> >> Doug
> >>
> > Yes,
> > I just noticed the jumper on the card.
> > Thanks a lot.
> >
> >
> Yes i changed the jumper to enable  E1.
> dahdi_scan shows the following
> [1]
> active=yes
> alarms=UNCONFIGURED
> description=Wildcard TE121 Card 0
> name=WCT1/0
> manufacturer=Digium
> devicetype=Wildcard TE121 with VPMADT032
> location=PCI Bus 04 Slot 09
> basechan=1
> totchans=31
> irq=17
> type=digital-E1
> syncsrc=0
> lbo=0 db (CSU)/0-133 feet (DSX-1)
> coding_opts=HDB3
> framing_opts=CCS,CRC4
> coding=
> framing=
> 
> But when i try to run dahdi_genconf i got the following error.
> 
> 31 channels in a T1 span at /usr/local/share/perl/5.10.0/Dahdi/Span.pm
> line 244.
> 
> dahdi_hardware
> 31 channels in a T1 span at /usr/local/share/perl/5.10.0/Dahdi/Span.pm
> line 244.
> 
> 
> What should i do about it?

I believe it was resolved with:

  http://svn.digium.com/view/dahdi?view=revision&revision=5626
  http://svn.digium.com/view/dahdi/tools/trunk/xpp/perl_modules/Dahdi/Span.pm?r1=5452&r2=5626

What version of the tools do you use?

-- 
               Tzafrir Cohen
icq#16849755              jabber:tzafrir.cohen at xorcom.com
+972-50-7952406           mailto:tzafrir.cohen at xorcom.com
http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir