[asterisk-users] connection to siemens hipath

[Jerry Geis]

I am connecting 1.4.22 and dahdi 2.1.0.3+2.1.0.2 to a siemens hipath 300 
and siemens hipath 4000. (2 channels to each switch)
with a TE210p card setup as T1 with em_w.

When the call is initiated to either switch the phone rings, when its 
answered then nothing...
I hear no audio etc... After the timeout period the call is hung up.
The phone switch 300 needs the T1 reset as the channel is not freed up.

Anyone ever ran into this? What might be going on? Its installed on a 
new dell poweredge 860.

Incoming calls I never see the "starting simple switch"...

----------------------
loadzone=us
defaultzone=us
span=1,1,6,esf,b8zs
e&m=1-2
span=2,1,6,esf,b8zs
e&m=25-26
----------------------- the card is on its own interrupt.
           CPU0       CPU1      
  0:   92977641          0    IO-APIC-edge  timer
  1:          9          0    IO-APIC-edge  i8042
  8:          1          0    IO-APIC-edge  rtc
  9:          0          0   IO-APIC-level  acpi
 12:        133          0    IO-APIC-edge  i8042
 14:         39          0    IO-APIC-edge  ide0
 50:       7629    2403996   IO-APIC-level  uhci_hcd:usb1, 
ehci_hcd:usb4, libata
 66:       9326   92941584   IO-APIC-level  wct2xxp
169:        294    1012573   IO-APIC-level  eth0
177:          0          0   IO-APIC-level  uhci_hcd:usb2
185:          0          0   IO-APIC-level  uhci_hcd:usb3
NMI:       3066       4650
LOC:   91316250   91316178
ERR:          0
MIS:          0


----------------------------- chan_dahdi.c
[channels]


switchtype=national
signalling=em_w
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
context=smvoice-incoming
group=1
channel => 1-2


switchtype=national
signalling=em_w
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
context=smvoice-incoming
group=1
channel => 25-26

yes they are just using channels 1,2 on both T1's

Any thoughts?

Jerry