[asterisk-users] call file bug?

[Danny Nicholas]

You should post the call file.  Also, I'd use DAHDI/G1 instead of DAHDI/1 as
that ties the call to a specific port/line (perhaps what you want to do?)

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Ray Chen
Sent: Tuesday, February 17, 2009 2:05 PM
To: asterisk-users at lists.digium.com
Subject: [asterisk-users] call file bug?

 

I have a problem of using call file to make an auto dial out call through
FXO channel. I defined the channel in the call file as "Channel:
DAHDI/1/8775203463" When I put the call file under the
/var/spool/asterisk/outgoing dir it did not call out but came to the context
I defined in extensions.conf as if the callee had answered the call. If I
make a call from an extension to DAHDI/1/8775203463 it'll success. . If I
change the channel to SIP/8000 and put the call file under
/var/spool/asterisk/outgoing it is also success - it calls the extension
8000 and the controle goes to the context after the extension 8000 answers
the call. I am using asterisk 1.4.23.1. Is it a bug introduced in this
release?

 

Thanks.

 


-- 

Be Yourself @ mail.com!
Choose From 200+ Email Addresses
Get a Free Account at www.mail.com <http://www.mail.com/Product.aspx> !

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090217/603564a9/attachment.htm