[asterisk-users] set caller id on outgoing calls through BRIISDNlines
Vieri
rentorbuy at yahoo.com
Fri Feb 6 11:35:55 CST 2009
If it's of any help, here's my misdn.conf:
[general]
misdn_init=/etc/misdn-init.conf
debug=0
ntdebugflags=0
ntdebugfile=/var/log/misdn-nt.log
ntkeepcalls=no
bridging=no
stop_tone_after_first_digit=yes
append_digits2exten=yes
dynamic_crypt=no
crypt_prefix=**
crypt_keys=test,muh
[default]
context=misdn
language=en
musicclass=default
senddtmf=yes
far_alerting=no
allowed_bearers=all
nationalprefix=0
internationalprefix=00
rxgain=0
txgain=0
te_choose_channel=no
pmp_l1_check=no
reject_cause=16
need_more_infos=no
nttimeout=no
method=standard
overlapdial=yes
dialplan=0
localdialplan=0
cpndialplan=0
early_bconnect=yes
incoming_early_audio=no
nodialtone=no
presentation=-1
screen=-1
echocancel=yes
echotraining=no
jitterbuffer=4000
jitterbuffer_upper_threshold=0
hdlc=no
[ISDN_GROUP]
context=from-pstn-deviate-custom
ports=1,2,3,4
msns=*
Thanks for your time.
--- On Fri, 2/6/09, Andrew Thomas <andy at datavox.co.uk> wrote:
> You're quite right. We'll need to see your
> misdn.conf file to check the
> settings.
>
>
> -->> -----Original Message-----
> -->> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-
> -->> bounces at lists.digium.com] On Behalf Of Vieri
> -->> Sent: 06 February 2009 13:49
> -->> To: asterisk-users at lists.digium.com
> -->> Subject: Re: [asterisk-users] set caller id on
> outgoing calls
> through
> -->> BRIISDNlines
> -->>
> -->> Thanks but it still doesn't work.
> -->> I did:
> -->>
> -->> -- Executing
> Set("SIP/4053-b23c5280",
> "CALLERID(num)=9999999999")
> -->> in new stack
> -->>
> -->> before Dial(), of course.
> -->>
> -->> I've read somewhere that the misdn debug
> message:
> -->>
> -->> -->> P[ 1] --> TON: Unknown
> -->>
> -->> may mean that the carrier did not recognize the
> caller id I set.
> Is
> -->> this true?
> -->>
> -->>
> -->> --- On Fri, 2/6/09, Andrew Thomas
> <andy at datavox.co.uk> wrote:
> -->>
> -->> > Use Set(CALLERID(num)=9999999999) instead
> of using
> -->> > CALLERID(all).
> -->> >
> -->> > Remember to set this BEFORE you Dial.
> -->> >
> -->> >
> -->> > -->> -----Original Message-----
> -->> > -->> From:
> asterisk-users-bounces at lists.digium.com
> -->> > [mailto:asterisk-users-
> -->> > -->> bounces at lists.digium.com] On
> Behalf Of Vieri
> -->> > -->> Sent: 06 February 2009 12:36
> -->> > -->> To:
> asterisk-users at lists.digium.com
> -->> > -->> Subject: [asterisk-users] set
> caller id on
> -->> > outgoing calls through
> -->> > BRI
> -->> > -->> ISDNlines
> -->> > -->>
> -->> > -->> I'm trying to set caller
> ids on outgoing
> -->> > calls.
> -->> > -->> I have a quad BRI B410P card
> connected to my
> -->> > telephony provider.
> -->> > -->> I know the list of DID numbers
> the provider
> -->> > assigned to my
> -->> > company.
> -->> > -->>
> -->> > -->> If I don't set the caller
> id then the
> -->> > callee always sees the same
> -->> > -->> "top-level" number.
> -->> > -->>
> -->> > -->> If I set the caller id to a
> specific DID number
> -->> > we own, the callee
> -->> > -->> keeps seeing the
> "top-level" number,
> -->> > as though the CALLERID
> -->> > function
> -->> > -->> had no effect.
> -->> > -->>
> -->> > -->> When dialing out on the BRI
> lines I see this in
> -->> > *CLI:
> -->> > -->>
> -->> > -->> -- Executing
> -->> > Set("SIP/4053-b2ba5a28",
> -->> > "CALLERID(all)="My Name"
> -->> > -->> <9999999999>") in
> new stack
> -->> > -->>
> -->> > -->> where 9999999999 is a valid
> DID number.
> -->> > -->>
> -->> > -->> My telephony provider swears
> that if the BRI
> -->> > lines are connected
> -->> > to
> -->> > -->> our PBX then we can set
> whichever caller id we
> -->> > want.
> -->> > -->>
> -->> > -->> How can I be sure that they
> are right?
> -->> > -->> What can I do to see if
> Asterisk is failing to
> -->> > set the caller id
> -->> > and
> -->> > -->> why?
> -->> > -->>
> -->> > -->> An misdn debug doesn't
> seem to reveal any
> -->> > errors setting the
> -->> > caller
> -->> > -->> id:
> -->> > -->>
> -->> > -->> P[ 0] --> Group Call
> group: ISDN_GROUP
> -->> > -->> P[ 1] Group [ISDN_GROUP] Port
> [1]
> -->> > -->> P[ 1] portup:1
> -->> > -->> P[ 0] --> * NEW CHANNEL
> dad:656660499
> -->> > oad:(null)
> -->> > -->> P[ 1] * Queuing chan 0xf651398
> -->> > -->> P[ 1] read_config: Getting
> Config
> -->> > -->> P[ 1] config_jb: Called
> -->> > -->> P[ 1] --> * CallGrp:
> PickupGrp:
> -->> > -->> P[ 1] --> TON: Unknown
> -->> > -->> P[ 1] --> LTON: Unknown
> -->> > -->> P[ 1] --> CTON: Unknown
> -->> > -->> P[ 1] * CALL:
> g:ISDN_GROUP/6666666666
> -->> > -->> P[ 1] --> * dad:6666666666
> -->> > tech:mISDN/1-u23701
> -->> > ctx:from-pstn-deviate-
> -->> > -->> custom
> -->> > -->> P[ 1] --> * adding2newbc
> ext 6666666666
> -->> > -->> P[ 1] --> * adding2newbc
> callerid
> -->> > 9999999999
> -->> > -->> P[ 1] --> pres: -1 screen:
> -1
> -->> > -->> P[ 1] --> pres: 0
> -->> > -->> P[ 1] --> PRES: Allowed
> (0x0)
> -->> > -->> P[ 1] --> SCREEN:
> Unscreened (0x0)
> -->> > -->> P[ 1] NO OPTS GIVEN
> -->> > -->> P[ 1] I SEND:SETUP
> oad:9999999999
> -->> > dad:6666666666 pid:2626
> -->> > -->> P[ 1] -->
> bc_state:BCHAN_CLEANED
> -->> > -->> P[ 1] --> channel:0
> mode:TE cause:16
> -->> > ocause:16 rad: cad:
> -->> > -->> P[ 1] --> info_dad:
> onumplan:0 dnumplan:0
> -->> > rnumplan:0 cpnnumplan:0
> -->> > -->> P[ 1] --> caps:Speech pi:0
> keypad:
> -->> > sending_complete:0
> -->> > -->> P[ 1] --> screen:0 -->
> pres:0
> -->> > -->> P[ 1] --> addr:0
> l3id:95bfc b_stid:0
> -->> > layer_id:50010180
> -->> > -->> P[ 1] -->
> facility:FAC_NONE
> -->> > out_facility:FAC_NONE
> -->> > -->> P[ 1] --> urate:0 rate:16
> mode:0 user1:0
> -->> > -->> P[ 1] --> bc:8212590 h:0
> sh:0
> -->> > -->> P[ 1] find_free_chan:
> req_chan:0
> -->> > -->> P[ 1] --> found chan: 1
> -->> > -->> P[ 1] set_chan_in_stack: 1
> -->> > -->> P[ 1] --> found channel:
> 1
> -->> > -->> P[ 1] --> new_l3id 95bfd
> -->> > -->> P[ 1] --> * SEND: State
> Dialing pid:2626
> -->> > -->> -- Called
> g:ISDN_GROUP/6666666666
> -->> > -->> P[ 1] Sending msg, prim:30580
> addr:41000104
> -->> > dinfo:95bfd
> -->> > -->> P[ 1] handle_frm:
> frm->addr:42000103
> -->> > frm->prim:30282
> -->> > -->> P[ 1] set_channel:
> bc->channel:1 channel:1
> -->> > -->> P[ 1] $$$ Setting up bc with
> stid :10010100
> -->> > -->> P[ 1] setup_bc: with dsp
> -->> > -->> P[ 1] --> Channel is 1
> -->> > -->> P[ 1] --> TRANSPARENT Mode
> -->> > -->> P[ 1] $$$ Bchan Activated addr
> 50010102
> -->> > -->> P[ 1] BC_STATE_CHANGE:
> l3id:95bfd
> -->> > from:BCHAN_CLEANED
> -->> > -->> to:BCHAN_ACTIVATED
> -->> > -->> P[ 1] lib Got Prim: Addr
> 42000103 prim 30282
> -->> > dinfo 95bfd
> -->> > -->> P[ 1] I IND :PROCEEDING
> oad:9999999999
> -->> > dad:6666666666 pid:2626
> -->> > -->> state:CALLING
> -->> > -->> P[ 1] --> channel:1
> mode:TE cause:16
> -->> > ocause:16 rad: cad:
> -->> > -->> P[ 1] --> info_dad:
> onumplan:0 dnumplan:0
> -->> > rnumplan:0 cpnnumplan:0
> -->> > -->> P[ 1] --> caps:Speech pi:0
> keypad:
> -->> > sending_complete:0
> -->> > -->> P[ 1] --> screen:0 -->
> pres:0
> -->> > -->> P[ 1] --> addr:50010102
> l3id:95bfd
> -->> > b_stid:10010100
> -->> > layer_id:50010180
> -->> > -->> P[ 1] -->
> facility:FAC_NONE
> -->> > out_facility:FAC_NONE
> -->> > -->> P[ 1] --> urate:0 rate:16
> mode:0 user1:0
> -->> > -->> P[ 1] --> bc:8212590 h:0
> sh:0
> -->> > -->> P[ 1] -->
> bc_state:BCHAN_ACTIVATED
> -->> > -->> P[ 1] Freeing Msg on
> prim:30282
> -->> > -->> -- mISDN/1-u23701 is
> proceeding passing it
> -->> > to
> -->> > SIP/4053-b23d5580
> -->> > -->>
> -->> > -->> The callee 6666666666 is
> expecting to see our
> -->> > DID 9999999999 on
> -->> > -->> his/her phone screen but is
> seeing our
> -->> > "top-level" number, say,
> -->> > -->> 0000000000.
> -->> > -->>
> -->> > -->> Help appreciated.
> -->> > -->>
> -->> > -->> Vieri
> -->> > -->>
> -->> > -->>
> -->> > -->>
> -->> > -->>
> -->> > -->>
> -->> > -->>
> _______________________________________________
> -->> > -->> -- Bandwidth and Colocation
> Provided by
> -->> > http://www.api-digital.com
> -->> > --
> -->> > -->>
> -->> > -->> asterisk-users mailing list
> -->> > -->> To UNSUBSCRIBE or update
> options visit:
> -->> > -->>
> -->> >
> http://lists.digium.com/mailman/listinfo/asterisk-users
> -->>
> -->>
> -->>
> -->>
> -->> _______________________________________________
> -->> -- Bandwidth and Colocation Provided by
> http://www.api-digital.com
> --
> -->>
> -->> asterisk-users mailing list
> -->> To UNSUBSCRIBE or update options visit:
> -->>
> http://lists.digium.com/mailman/listinfo/asterisk-users
More information about the asterisk-users
mailing list