[asterisk-users] siemens hipath 4000

[Jerry Geis]

I am connecting to a siemens hipath 4000 with dahdi 2.1.0.4
and asterisk 1.4.23 using a Te210P card.

the phone guy is saying that the lines are reporting always BUSY.

however on my end the status shows OK.

Anyone seen this? Is there something different about connecting PRI to 
siemens hipath?

system.conf shows:
loadzone=us
defaultzone=us

span=1,1,6,esf,b8zs
bchan=1-5
dchan=24

chan_dahdi.conf:
[channels]


switchtype=national
signalling=pri_cpe
echocancel=yes
echocancelwhenbridged=yes
echotraining=400
callerid=asreceived
context=smvoice-incoming
group=1
channel => 1-5

Any ideas?

Also - how do you get a card out of loop mode after you have used the 
dahdi_tool to select loop mode. there is no UNLOOP or anything. I have
reset the machine and it still seems to be in loop mode.

Jerry