[asterisk-users] Sending Calls via SIP trunk from two different IP addresses from same Asterisk Machine

[bilal ghayyad]

My provider has one IP and one port ONLY, I need to send for him the calls from different IP's on the same Asterisk machine, how?

Regards
Bilal


--- On Mon, 2/2/09, David Gibbons <dave at videon-central.com> wrote:

> From: David Gibbons <dave at videon-central.com>
> Subject: RE: [asterisk-users] Sending Calls via SIP trunk from two different IP addresses from same Asterisk Machine
> To: "'bilmar_gh at yahoo.com'" <bilmar_gh at yahoo.com>, "'Asterisk Users Mailing List - Non-Commercial Discussion'" <asterisk-users at lists.digium.com>
> Date: Monday, February 2, 2009, 2:16 PM
> If your provider has two different IP addresses at its
> endpoint, you could use iproute2 (source based routing) with
> two local source addresses to make sure that there is a
> one-to-one mapping of source address to destination address.
> Then you could have two peer definitions and an
> address=declaration in each. As I think about it, I believe
> that with iproute2, you could use one provider endpoint
> address and two local addresses in the same manner, without
> the one-to-one mapping...
> 
> This seems like the most elegant solution in my mind. And
> the only one that will work reliably... :)
> 
> --Dave
> 
> <snip>
> If that code in the below link worked, will I be able to
> have two SIP (IP Trunk), both send for same destination
> IP:Port, but from different source IP's? So the
> destination will authorize me in my two different IP's?
> </snip>