[asterisk-users] Asterisk - Trixbox

[Steve Totaro]

Your carrier is running Trixbox?  That is scary.

Anyways, they are obviously routing calls to the wrong machine.  If
your side worked properly before and now does not, then they have to
explain why.

That would be my stance anyways.

Thanks,
Steve

On Mon, Feb 2, 2009 at 10:18 AM, Mike Hammett <asterisk-users at ics-il.net> wrote:
> They are running Trixbox 2.6.1.10 and I'm running Asterisk 1.2.12.1.
>
>
> -----
> Mike Hammett
> Intelligent Computing Solutions
> http://www.ics-il.com
>
>
>
> --------------------------------------------------
> From: "Mike Hammett" <asterisk-users at ics-il.net>
> Sent: Thursday, January 29, 2009 1:47 PM
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users at lists.digium.com>
> Subject: Re: [asterisk-users] Asterisk - Trixbox
>
>> Should Trixbox be sending calls to the s extension in the first place?  I
>> can't set an s extension because there are many independent phone numbers
>> in
>> that context that worked fine before my provider switched to Trixbox.
>>
>> Also, why would the 8159093011 phone number be showing up in the sip
>> debugging when that number isn't even present on that machine?
>>
>>
>> -----
>> Mike Hammett
>> Intelligent Computing Solutions
>> http://www.ics-il.com
>>
>>
>>
>> --------------------------------------------------
>> From: "Adrià Vidal" <adriavidal at gmail.com>
>> Sent: Friday, January 16, 2009 2:44 PM
>> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
>> <asterisk-users at lists.digium.com>
>> Subject: Re: [asterisk-users] Asterisk - Trixbox
>>
>>> On Thu, Jan 15, 2009 at 8:00 PM, Mike Hammett <asterisk-users at ics-il.net>
>>> wrote:
>>>> My provider migrated from an old EOL softswitch to Trixbox.
>>>>
>>>> I have a number (8159093011) on a different server on a different
>>>> network.
>>>> It appears as though the incoming calls are trying to authenticate
>>>> against
>>>> that number, which isn't present on the box.  Could someone help me
>>>> decode
>>>> this debugging output?  I was calling 8159911010.  My server is
>>>> 208.100.1.33.  Theirs is 208.1.87.235.  I solved the s@ problem on the
>>>> other
>>>> server by adding insecure settings, but that didn't seem to solve it on
>>>> this
>>>> one.
>>>>
>>>> http://pastebin.com/f5151341f
>>>>
>>>>
>>>> -----
>>>> Mike Hammett
>>>> Intelligent Computing Solutions
>>>> http://www.ics-il.com
>>>
>>>
>>>
>>> I think you need something inside [DID-incoming] like for example...
>>>
>>>
>>> exten => s,1,NoOP(---------incoming call-------)
>>> exten => s,n,Playback(wellcome)
>>>
>>>
>>> #
>>> Looking for s in DID-incoming (domain 208.100.1.33)
>>> #
>>> Reliably Transmitting (no NAT) to 208.1.87.235:5060:
>>> #
>>> SIP/2.0 404 Not Found
>>>
>>>
>>> --
>>> --
>>> Adrià Vidal
>>> adriavidal at gmail.com
>>> _______________________________________________