[asterisk-users] DAHDI outgoing

[Mike]

Thank you, at least I am getting the same thing.
 
Mike

> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
> bounces at lists.digium.com] On Behalf Of Jim Dickenson
> Sent: Friday, December 04, 2009 16:37
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] DAHDI outgoing
> 
> On my * 1.6.0.13 box I see this:
> 
> dahdi show channels
> 
>    Chan Extension  Context         Language   MOH Interpret        Blocked
> State
>  pseudo            nonesaid        en         default
> In Service
>       1 4151111111 from-outside    en         default
> In Service
>       2            from-outside    en         default
> In Service
>       3            from-outside    en         default
> In Service
>       4            from-outside    en         default
> In Service
>       5            from-outside    en         default
> In Service
>       6            from-outside    en         default
> In Service
>       7            from-outside    en         default
> In Service
>       8            from-outside    en         default
> In Service
>       9            from-outside    en         default
> In Service
>      10            from-outside    en         default
> In Service
>      11            from-outside    en         default
> In Service
>      12            from-outside    en         default
> In Service
>      13            from-outside    en         default
> In Service
>      14            from-outside    en         default
> In Service
>      15            from-outside    en         default
> In Service
>      16            from-outside    en         default
> In Service
>      17            from-outside    en         default
> In Service
>      18            from-outside    en         default
> In Service
>      19            from-outside    en         default
> In Service
>      20            from-outside    en         default
> In Service
>      21            from-outside    en         default
> In Service
>      22            from-outside    en         default
> In Service
>      23            from-outside    en         default
> In Service
> 
> In this case I had an inbound call to one of my DID numbers for this PRI
> line. It showed the DID on the port 1 line. If I made an outbound call
> nothing showed for the port used. To see that I needed to do the command
> "core show channels" and then I saw this for the outbound channel in use:
> 
> DAHDI/23-1           (None)               Up      AppDial((Outgoing Line))
> 
> I do not see a way to do any summary reports directly in CLI.
> --
> Jim Dickenson
> mailto:dickenson at cfmc.com
> 
> CfMC
> http://www.cfmc.com/
> 
> 
> 
> On Dec 4, 2009, at 11:51 AM, Mike wrote:
> 
> > Or am I misunderstanding the displayed information?  What I was looking
> for was a list of channels that shows which one is currently busy, and
> ideally also a way to know how many channels are used per span (although I
> could work it out from the former if it was available)
> >
> 
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users