[asterisk-users] Dahdi_genconf does not generate NT/TE configuration

[Olivier]

2009/12/4 Tzafrir Cohen <tzafrir.cohen at xorcom.com>

> On Fri, Dec 04, 2009 at 04:06:29PM +0100, Olivier wrote:
> > 2009/12/4 Tzafrir Cohen <tzafrir.cohen at xorcom.com>
> >
> > > On Fri, Dec 04, 2009 at 02:42:18PM +0100, Olivier wrote:
> > > > Hi,
> > > >
> > > > I'm using revision 6822 of Dahdi Tools.
> > > >
> > > > # dahdi_hardware
> > > > pci:0000:05:06.0     wcb4xxp+     d161:b410 Digium Wildcard B410P
> > > >
> > > > # asterisk -rx "dahdi show version"
> > > > DAHDI Version: 2.2.0.2 Echo Canceller: OSLEC
> > > >
> > > > # cat /etc/dahdi/genconf_parameters
> > > > ...
> > > > pri_termtype
> > > >         SPAN/1          TE
> > > >         SPAN/2          TE
> > > >         SPAN/3          NT
> > > >         SPAN/4          NT
> > >
> > > With BRI cards dahdi_genconf assumes that it uses whatever the card is
> > > jumpered for.
> > >
> >
> > OK but I'm quite certain I set each jumper this way :
> > jumper 1 and 2 in TE mode, 3 and 4 in NT modes with termination).
> > How can I further check jumpers are correctly "read" ?
> >
> > As it worked correctly after I hand edited system.conf and
> > dahdi-channels.cont with appropriate values and I connected port 1 to
> port 4
> > (and port 2 to 3), I would say there might an issue in card jumper
> > detection.
>
> The qozap driver showed it in name of the driver (or was it the
> description)?
>
> Hmm... what about wcb4xxp?
>

I'm afraid I don't get it ...
In this case, I'm using a single B410P card as shown with dahdi_hardware :

> > > # dahdi_hardware
> > > pci:0000:05:06.0     wcb4xxp+     d161:b410 Digium Wildcard B410P


> --
>                Tzafrir Cohen
> icq#16849755              jabber:tzafrir.cohen at xorcom.com<jabber%3Atzafrir.cohen at xorcom.com>
> +972-50-7952406           mailto:tzafrir.cohen at xorcom.com
> http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20091204/34c7e121/attachment.htm