[asterisk-users] Call File Channel

Danny Nicholas danny at debsinc.com
Wed Aug 12 16:28:33 CDT 2009


Your'e wanting control of the call from a call file.  The way to do that is
to call using a context instead of a Technology/number.  

When you call SIP/trunk_1, you are using the default context and therefore
don't have any "fallthrough" options unless you wrote them into your default
context.  If your default context allows dynamic handling on fallthrough,
you would probably still want to call number 1 using a context.  I used
SIP/170 as an example; you could use SIP/trunk1/#1 just as easily.

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David Gibbons
Sent: Wednesday, August 12, 2009 4:21 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Call File Channel

 

Context: is what the call is dumped into after it is answered, at extension
Extension:. I don't think it's related to how the call is placed.

 

I can dial the local extension SIP/170 but I'm not sure where that gets me.

 

Basically I want to have the same failover that I have for all other
outgoing calls on these automatic calls.

 

Thanks

Dave

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Danny Nicholas
Sent: Wednesday, August 12, 2009 5:17 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Call File Channel

 

Ok.  Here's how you would do that:

 

Channel: SIP/170 (some local extension)

CallerID: SIP/104 (another local extension)

MaxRetries: 1

WaitTime: 60

retryTime: 5

Context: your_context

Extension: s

 

This should create an extension call using your context.  The context can
then dial out as you write it.

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David Gibbons
Sent: Wednesday, August 12, 2009 4:10 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Call File Channel

 

Thanks Danny,

 

I do have a dial cmd with multiple arguments in my normal outgoing context.
I guess my question really is:

 

How do I tell the call file using "Channel: XXX" to use my outgoing context
instead of Zap/g1/xx or sip/trunk_x/xx directly?

 

-Dave

 

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Danny Nicholas
Sent: Wednesday, August 12, 2009 5:05 PM
To: 'Asterisk Users Mailing List - Non-Commercial Discussion'
Subject: Re: [asterisk-users] Call File Channel

 

Exten => s,1,Dial(SIP/trunk_x/#1&SIP/trunk_y/#2&ZAP/g1/#3,60)

 

  _____  

From: asterisk-users-bounces at lists.digium.com
[mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of David Gibbons
Sent: Wednesday, August 12, 2009 3:59 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: [asterisk-users] Call File Channel

 

I know I'm missing something here (been a long day).

 

How can I specify more than one channel in a call file?

 

I want to dial SIP/trunk_x and fail to SIP/trunk_y and fail to ZAP/g1.

 

Thanks

Dave

-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20090812/4536eaea/attachment-0001.htm 


More information about the asterisk-users mailing list