[asterisk-users] Can't dial out until I dial in once

Michael van der Stoop mstoop at dpia.ca
Fri Apr 24 23:01:44 CDT 2009


When I restart or reboot I can not dial out.  The dial() incorrectly 
sees dahdi/1 as busy.  I call in once from a cell phone, which is 
successful then I can call out with out issue.  Any ideas would be much 
appreciated.

Sangoma B600de

asterisk-1.6.0.9
dahdi-linux-2.1.0.4
linux-2.6.28-gentoo-r5
wanpipe-3.3.16



###chan_dahdi.conf 


;autogenerated by /usr/sbin/wancfg_dahdi do not hand edit
;autogenrated on 2009-02-21
;Dahdi Channels Configurations
;For detailed Dahdi options, view /etc/asterisk/chan_dahdi.conf.bak

[trunkgroups]

[channels]
context=fromPSTN
usecallerid=yes
hidecallerid=no
callwaiting=no
usecallingpres=no
;callwaitingcallerid=yes
callwaitingcallerid=no
threewaycalling=no
transfer=yes
canpark=yes
cancallforward=yes
callreturn=no
echocancel=no
echocancelwhenbridged=no
relaxdtmf=yes
rxgain=0.0
txgain=0.0
group=1
callgroup=1
pickupgroup=1
immediate=no
;immediate=yes


;Sangoma AFT-B600 [slot:4 bus:5 span:1]  <wanpipe1>
context=fromPSTN
group=0
echocancel=no
signalling = fxs_ks
channel => 1

context=fromPSTN
group=0
echocancel=no
signalling = fxs_ks
channel => 2

context=fromPSTN
group=1
echocancel=no
signalling = fxs_ks
channel => 3

context=fromPSTN
group=1
echocancel=no
signalling = fxs_ks
channel => 4

context=phones
group=2
echocancel=no
signalling = fxo_ks
channel => 5


~~~
Kind regards,

Mike van der Stoop



More information about the asterisk-users mailing list