[asterisk-users] cant get a x100p works

Martin asterisklist at callthem.info
Sat Apr 4 11:44:57 CDT 2009


Lol,

I'd say this was wrong answer:

"What's the output of:

 lsmod | grep ^dahdi"

you could simply check /proc/interrupts to see if the driver is bound
to the IRQ ...
kernel 2.6 allows any module to load even if it doesn't use the
hardware so your lspci
shows all the dahdi modules as expected

He didn't post much of any information to show anything related to the
driver itself (dmeg, /proc/interrupts, /dev/dahdi/1 etc ...)
So the driver can be loaded or not.

Martin

On Sat, Apr 4, 2009 at 7:07 AM, Tzafrir Cohen <tzafrir.cohen at xorcom.com> wrote:
> On Thu, Apr 02, 2009 at 07:03:42PM -0500, Martin wrote:
>> Then you need to edit /etc/dahdi/system.conf
>>
>> manually and add
>>
>> fxsks=1
>
> Wrong answer. The driver has failed to identify and use the card.
>
> --
>               Tzafrir Cohen
> icq#16849755              jabber:tzafrir.cohen at xorcom.com
> +972-50-7952406           mailto:tzafrir.cohen at xorcom.com
> http://www.xorcom.com  iax:guest at local.xorcom.com/tzafrir
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



More information about the asterisk-users mailing list