[asterisk-users] IAX Hangup floods link with repeated VNAK and HANGUP

[Tony Mountifield]

In article <223CF3DA2BD6E04A848489C110796B7A479D59 at cnsinsbs1.cairns.i-solutions.net.au>,
Nathan Dennis <Nathan.Dennis at i-solutions.net.au> wrote:
> We have been using asterisk for a while now but have recently needed to
> install a second server in a remote office and set up a iax trunk
> between the 2 servers. The dial plan seems to work well when I tested it
> on the same LAN. However this afternoon I connected the system at the
> remote office and made some calls. All the calls connect and work fine,
> voice quality is great no really couldn't have hoped for better. Hang up
> the call and tried to make another call and nothing, the link was not
> responding, after much trouble shooting I have found that after the call
> is hung up the 2 asterisk servers seem to go into some kind of loop
> sending each other message. I have pasted a debug for both servers below
> that include everything from the start of the call to after hangup. I
> have cut them short at the VNAK and Hangup cycle just continues for
> 30seconds or so flooding the link completely.
>  
> Any help you may be able to provide would be greatly appreciated

I can't help with your problem, sorry, but anyone who can help will need
to know exactly what version of Asterisk you have at each end.

Cheers
Tony
-- 
Tony Mountifield
Work: tony at softins.co.uk - http://www.softins.co.uk
Play: tony at mountifield.org - http://tony.mountifield.org