[asterisk-users] chan_misdn troubles

[Julien Claassen]

Hi!
   I'm also still new to this. but perhaps:
   Did you do make examples, or did you have an earlier asterisk installation, 
so the configuration files were present? If so did you make sure, that you 
mISDN card was properly configured, using:
1. misdn-init scan
2. misdn-init config
3. misdn-init start
   Or probably reboot your machine to make sure the mISDN-kernel-site 
(misdn.org) are properly start and initialised. Make sure you have:
1. /dev/mISDN
2. all the modules loaded:
lsmod
   Then edit the misdn.conf in /etc/asterisk and make sure it is setup to your 
needs (ports, msns, jitter, etc.
   I remember, that I had a lot of pain to get it working on my machine. Mostly 
due to kernel problems (linux 2.6.2x).
   I hope this helps.
   Kindest regards
          Julien

--------
Music was my first love and it will be my last (John Miles)

======== FIND MY WEB-PROJECT AT: ========
http://ltsb.sourceforge.net
the Linux TextBased Studio guide
======= AND MY PERSONAL PAGES AT: =======
http://www.juliencoder.de