[asterisk-users] PRI E1 Inbound calls hangup with busy after a few seconds
Paul Hales
pdhales at optusnet.com.au
Fri Sep 19 01:57:01 CDT 2008
When does the call actually hang up?
The final line of this (started music on hold, class 'default', on
Zap/6-1) acutally looks successful.
If the next line after this reads something like 'music on hold stopped'
you have a MOH problem.
PaulH
Daniel Johnson wrote:
> Here is the rest of the debug.
>
>
>> -----------------------------------------------------------------------------------------------------------------
>>
>> PRI Debug output for successful inbound:
>> ----------------------------------------------------------------------------------------------------------------
>>
>> This is included in a reply as the message was to big.
>>
>>
> < Protocol Discriminator: Q.931 (8) len=45
> < Call Ref: len= 2 (reference 5493/0x1575) (Originator)
> < Message type: SETUP (5)
> < [04 03 80 90 a3]
> < Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
> capability: Speech (0)
> < Ext: 1 Trans mode/rate: 64kbps,
> circuit-mode (16)
> < User information layer 1: A-Law (35)
> < [18 03 a1 83 86]
> < Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
> Preferred Dchan: 0
> < ChanSel: As indicated in following octets
> < Ext: 1 Coding: 0 Number Specified Channel Type: 3
> < Ext: 1 Channel: 6 ]
> < [6c 0c 21 83 30 37 33 33 38 37 35 35 35 35]
> < Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1)
> < Presentation: Presentation allowed of
> network provided number (3) '0733875555' ]
> < [70 09 c1 33 34 33 39 37 33 33 33]
> < Called Number (len=11) [ Ext: 1 TON: Subscriber Number (4) NPI:
> ISDN/Telephony Numbering Plan (E.164/E.163) (1) '34397333' ]
> < [7d 02 91 81]
> < IE: High-layer Compatibility (len = 4)
> < [a1]sk*CLI>
> < Sending Complete (len= 1)
> -- Making new call for cr 5493
> -- Processing Q.931 Call Setup
> -- Processing IE 4 (cs0, Bearer Capability)
> -- Processing IE 24 (cs0, Channel Identification)
> -- Processing IE 108 (cs0, Calling Party Number)
> -- Processing IE 112 (cs0, Called Party Number)
> -- Processing IE 125 (cs0, High-layer Compatibility)
> -- Processing IE 161 (cs0, Sending Complete)
> q931.c:3509 q931_receive: call 5493 on channel 6 enters state 6 (Call
> Present)
> q931.c:2774 q931_call_proceeding: call 5493 on channel 6 enters state 9
> (Incoming Call Proceeding)
> > Protocol Discriminator: Q.931 (8) len=11
> > Call Ref: len= 2 (reference 5493/0x1575) (Terminator)
> > Message type: CALL PROCEEDING (2)
> > [18 04 e9 81 83 86]
> > Channel ID (len= 6) [ Ext: 1 IntID: Explicit PRI Spare: 0
> Exclusive Dchan: 0
> > ChanSel: As indicated in following octets
> > Ext: 1 DS1 Identifier: 1
> > Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> > Ext: 1 Channel: 6 ]
> -- Accepting call from '0733875555' to '34397333' on channel 1/6, span 1
> -- Executing [34397333 at from-pstn:1] NoOp("Zap/6-1", "") in new stack
> -- Executing [34397333 at from-pstn:2] Dial("Zap/6-1", "SIP/511|2") in
> new stack
> -- Called 511
> -- SIP/511-0821ff70 is ringing
> q931.c:2802 q931_alerting: call 5493 on channel 6 enters state 7 (Call
> Received)
> > Protocol Discriminator: Q.931 (8) len=9
> > Call Ref: len= 2 (reference 5493/0x1575) (Terminator)
> > Message type: ALERTING (1)
> > [1e 02 81 88]
> > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
> (0) 0: 0 Location: Private network serving the local user (1)
> > Ext: 1 Progress Description: Inband
> information or appropriate pattern now available. (8) ]
> < Protocol Discriminator: Q.931 (8) len=13
> < Call Ref: len= 2 (reference 5493/0x1575) (Originator)
> < Message type: STATUS (125)
> < [08 03 80 e4 18]
> < Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
> Location: User (0)
> < Ext: 1 Cause: Invalid information element contents
> (100), class = Protocol Error (e.g. unknown message) (6) ]
> < Cause data 1: 18 (24)
> < [14 01 06]
> < Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call
> state: Call Present (6)
> -- Processing IE 8 (cs0, Cause)
> -- Processing IE 20 (cs0, Call State)
> -- Nobody picked up in 2000 ms
> -- Executing [34397333 at from-pstn:3] Goto("Zap/6-1", "ConfMe|s|1") in
> new stack
> -- Goto (ConfMe,s,1)
> -- Executing [s at ConfMe:1] Answer("Zap/6-1", "") in new stack
> q931.c:2909 q931_connect: call 5493 on channel 6 enters state 8 (Connect
> Request)
> > Protocol Discriminator: Q.931 (8) len=15
> > Call Ref: len= 2 (reference 5493/0x1575) (Terminator)
> > Message type: CONNECT (7)
> > [18 04 e9 81 83 86]
> > Channel ID (len= 6) [ Ext: 1 IntID: Explicit PRI Spare: 0
> Exclusive Dchan: 0
> > ChanSel: As indicated in following octets
> > Ext: 1 DS1 Identifier: 1
> > Ext: 1 Coding: 0 Number Specified Channel
> Type: 3
> > Ext: 1 Channel: 6 ]
> > [1e 02 81 82]
> > Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
> (0) 0: 0 Location: Private network serving the local user (1)
> > Ext: 1 Progress Description: Called
> equipment is non-ISDN. (2) ]
> -- Executing [s at ConfMe:2] MeetMe("Zap/6-1", "9000|crM|") in new stack
> == Parsing '/etc/asterisk/meetme.conf': Found
> -- Created MeetMe conference 1023 for conference '9000'
> -- <Zap/6-1> Playing 'conf-getpin' (language 'en')
> < Protocol Discriminator: Q.931 (8) len=5
> < Call Ref: len= 2 (reference 5493/0x1575) (Originator)
> < Message type: CONNECT ACKNOWLEDGE (15)
> q931.c:3669 q931_receive: call 5493 on channel 6 enters state 10 (Active)
> < Protocol Discriminator: Q.931 (8) len=13
> < Call Ref: len= 2 (reference 5493/0x1575) (Originator)
> < Message type: STATUS (125)
> < [08 03 80 e4 18]
> < Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
> Location: User (0)
> < Ext: 1 Cause: Invalid information element contents
> (100), class = Protocol Error (e.g. unknown message) (6) ]
> < Cause data 1: 18 (24)
> < [14 01 0a]>
> < Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call
> state: Active (10)
> -- Processing IE 8 (cs0, Cause)
> -- Processing IE 20 (cs0, Call State)
> > Starting recording of MeetMe Conference 9000 into file
> meetme-conf-rec-9000-1221795803.12.wav.
> -- <Zap/6-1> Playing 'conf-onlyperson' (language 'en')
> -- Started music on hold, class 'default', on Zap/6-1
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list