[asterisk-users] PRI E1 Inbound calls hangup with busy after a few seconds
Daniel Johnson
dan.j at scanningsystems.com.au
Fri Sep 19 01:35:33 CDT 2008
Here is the rest of the debug.
> -----------------------------------------------------------------------------------------------------------------
>
> PRI Debug output for successful inbound:
> ----------------------------------------------------------------------------------------------------------------
>
> This is included in a reply as the message was to big.
>
< Protocol Discriminator: Q.931 (8) len=45
< Call Ref: len= 2 (reference 5493/0x1575) (Originator)
< Message type: SETUP (5)
< [04 03 80 90 a3]
< Bearer Capability (len= 5) [ Ext: 1 Q.931 Std: 0 Info transfer
capability: Speech (0)
< Ext: 1 Trans mode/rate: 64kbps,
circuit-mode (16)
< User information layer 1: A-Law (35)
< [18 03 a1 83 86]
< Channel ID (len= 5) [ Ext: 1 IntID: Implicit PRI Spare: 0
Preferred Dchan: 0
< ChanSel: As indicated in following octets
< Ext: 1 Coding: 0 Number Specified Channel Type: 3
< Ext: 1 Channel: 6 ]
< [6c 0c 21 83 30 37 33 33 38 37 35 35 35 35]
< Calling Number (len=14) [ Ext: 0 TON: National Number (2) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1)
< Presentation: Presentation allowed of
network provided number (3) '0733875555' ]
< [70 09 c1 33 34 33 39 37 33 33 33]
< Called Number (len=11) [ Ext: 1 TON: Subscriber Number (4) NPI:
ISDN/Telephony Numbering Plan (E.164/E.163) (1) '34397333' ]
< [7d 02 91 81]
< IE: High-layer Compatibility (len = 4)
< [a1]sk*CLI>
< Sending Complete (len= 1)
-- Making new call for cr 5493
-- Processing Q.931 Call Setup
-- Processing IE 4 (cs0, Bearer Capability)
-- Processing IE 24 (cs0, Channel Identification)
-- Processing IE 108 (cs0, Calling Party Number)
-- Processing IE 112 (cs0, Called Party Number)
-- Processing IE 125 (cs0, High-layer Compatibility)
-- Processing IE 161 (cs0, Sending Complete)
q931.c:3509 q931_receive: call 5493 on channel 6 enters state 6 (Call
Present)
q931.c:2774 q931_call_proceeding: call 5493 on channel 6 enters state 9
(Incoming Call Proceeding)
> Protocol Discriminator: Q.931 (8) len=11
> Call Ref: len= 2 (reference 5493/0x1575) (Terminator)
> Message type: CALL PROCEEDING (2)
> [18 04 e9 81 83 86]
> Channel ID (len= 6) [ Ext: 1 IntID: Explicit PRI Spare: 0
Exclusive Dchan: 0
> ChanSel: As indicated in following octets
> Ext: 1 DS1 Identifier: 1
> Ext: 1 Coding: 0 Number Specified Channel
Type: 3
> Ext: 1 Channel: 6 ]
-- Accepting call from '0733875555' to '34397333' on channel 1/6, span 1
-- Executing [34397333 at from-pstn:1] NoOp("Zap/6-1", "") in new stack
-- Executing [34397333 at from-pstn:2] Dial("Zap/6-1", "SIP/511|2") in
new stack
-- Called 511
-- SIP/511-0821ff70 is ringing
q931.c:2802 q931_alerting: call 5493 on channel 6 enters state 7 (Call
Received)
> Protocol Discriminator: Q.931 (8) len=9
> Call Ref: len= 2 (reference 5493/0x1575) (Terminator)
> Message type: ALERTING (1)
> [1e 02 81 88]
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
(0) 0: 0 Location: Private network serving the local user (1)
> Ext: 1 Progress Description: Inband
information or appropriate pattern now available. (8) ]
< Protocol Discriminator: Q.931 (8) len=13
< Call Ref: len= 2 (reference 5493/0x1575) (Originator)
< Message type: STATUS (125)
< [08 03 80 e4 18]
< Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
Location: User (0)
< Ext: 1 Cause: Invalid information element contents
(100), class = Protocol Error (e.g. unknown message) (6) ]
< Cause data 1: 18 (24)
< [14 01 06]
< Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call
state: Call Present (6)
-- Processing IE 8 (cs0, Cause)
-- Processing IE 20 (cs0, Call State)
-- Nobody picked up in 2000 ms
-- Executing [34397333 at from-pstn:3] Goto("Zap/6-1", "ConfMe|s|1") in
new stack
-- Goto (ConfMe,s,1)
-- Executing [s at ConfMe:1] Answer("Zap/6-1", "") in new stack
q931.c:2909 q931_connect: call 5493 on channel 6 enters state 8 (Connect
Request)
> Protocol Discriminator: Q.931 (8) len=15
> Call Ref: len= 2 (reference 5493/0x1575) (Terminator)
> Message type: CONNECT (7)
> [18 04 e9 81 83 86]
> Channel ID (len= 6) [ Ext: 1 IntID: Explicit PRI Spare: 0
Exclusive Dchan: 0
> ChanSel: As indicated in following octets
> Ext: 1 DS1 Identifier: 1
> Ext: 1 Coding: 0 Number Specified Channel
Type: 3
> Ext: 1 Channel: 6 ]
> [1e 02 81 82]
> Progress Indicator (len= 4) [ Ext: 1 Coding: CCITT (ITU) standard
(0) 0: 0 Location: Private network serving the local user (1)
> Ext: 1 Progress Description: Called
equipment is non-ISDN. (2) ]
-- Executing [s at ConfMe:2] MeetMe("Zap/6-1", "9000|crM|") in new stack
== Parsing '/etc/asterisk/meetme.conf': Found
-- Created MeetMe conference 1023 for conference '9000'
-- <Zap/6-1> Playing 'conf-getpin' (language 'en')
< Protocol Discriminator: Q.931 (8) len=5
< Call Ref: len= 2 (reference 5493/0x1575) (Originator)
< Message type: CONNECT ACKNOWLEDGE (15)
q931.c:3669 q931_receive: call 5493 on channel 6 enters state 10 (Active)
< Protocol Discriminator: Q.931 (8) len=13
< Call Ref: len= 2 (reference 5493/0x1575) (Originator)
< Message type: STATUS (125)
< [08 03 80 e4 18]
< Cause (len= 5) [ Ext: 1 Coding: CCITT (ITU) standard (0) Spare: 0
Location: User (0)
< Ext: 1 Cause: Invalid information element contents
(100), class = Protocol Error (e.g. unknown message) (6) ]
< Cause data 1: 18 (24)
< [14 01 0a]>
< Call State (len= 3) [ Ext: 0 Coding: CCITT (ITU) standard (0) Call
state: Active (10)
-- Processing IE 8 (cs0, Cause)
-- Processing IE 20 (cs0, Call State)
> Starting recording of MeetMe Conference 9000 into file
meetme-conf-rec-9000-1221795803.12.wav.
-- <Zap/6-1> Playing 'conf-onlyperson' (language 'en')
-- Started music on hold, class 'default', on Zap/6-1
More information about the asterisk-users
mailing list