[asterisk-users] Pressing 0 to get an external line

[Christian Victor]

Hi Asterisk users!

I have a little problem with an Asterisk 1.4.22 installation for a
customer. The PBX is connected to an E1 line and we have a few snom 300
attached to it.

The goal is to emulate traditional german PBX behaviour wich is the play
a stuttered "internal" dialtone after pickup and accept all internal
extensions. If a specific "get office" digit - usually 0 - is pressed
you get the normal dialtone. Now you can enter the external telephone
number end get connected immediately without pressing "dial" on the snom
phone.

My problem here is first to implement this internal/external dialtone
and second to make the phone dial without pressing "dial" on the phone.
Because the length of telephone numbers in germany is not constant we
will have to implement this with a timeout or by somehow overlap-dialing
digit by tigit to the E1.

I hope one of you already implemented this behaviour or can maybe push
me in the right direction.

Thanks a lot
Christian
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20080910/8fc486f1/attachment.htm