[asterisk-users] PRI Splitter

Craig Guy craig.a.guy at gmail.com
Fri Sep 5 11:08:45 CDT 2008


I had a look at mine and it has only relays for pins 1,2,4,5 - the other relay positions are on the PCB are not populated.  Maybe it has changed recently.

Craig

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Igor Hernandez
Sent: Thursday, 4 September 2008 7:07 PM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] PRI Splitter

Hy Craig,

Can you elaborate on that? In our setup we have it doing just that and
it works without a glitch.

Regards,

Igor H.

Craig Guy wrote:
> The FSV-4PFS as shipped will not switch Ethernet – it switches pins 1,2,4,5.
> 
>  
> 
> Craig
> 
>  
> 
> *From:* asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] *On Behalf Of *FailSafe
> Inc.
> *Sent:* Tuesday, 2 September 2008 11:27 PM
> *To:* asterisk-users at lists.digium.com
> *Subject:* Re: [asterisk-users] PRI Splitter
> 
>  
> 
> Although the original topic of this thread has changed quite a bit, I
> wanted to point out that the "SPF" Product that you are discussing is
> quite similar to our product, the FSV-4PFS.  Ours is a 4 port device
> which can switch 4 T1/E1/J1/Ethernet or as many as 16 analog lines from
> a primary to a backup server.  It uses similar logic (power outage =
> failover server, loss of hearbeat = failover server) and also has a
> physical mechanical switch on the front of it which allows manual
> override switching to main or secondary server.
> 
>  
> 
> We also have addressed the 'clean startup' that was discussed a few
> posts back.  The switch will start and remain in 'failover mode' until
> such time as it receives a hearbeat or the physical switch is moved to
> the "main' position.  A failed main server can be restarted/repowered
> without bothering the backup server operation one bit - until you are
> ready to switch back to the main server.
> 
>  
> 
> http://www.failsafevoip.com/index.php?main_page=product_info&products_id=1
> <http://www.failsafevoip.com/index.php?main_page=product_info&products_id=1>
> 
>  
> 
> 
> -- 
> FailSafeVOIP, Inc.
> "Safe is always better than failed"
> http://www.failsafevoip.com
> sales at failsafevoip.com <mailto:sales at failsafevoip.com>
> 
>  
> 
> On Tue, 2 Sep 2008 00:22:45 +0200, "Christian Victor" said:
> 
>> that when both servers power fail you have a problem no matter if the
> 
>> failover switch ist still working or not.
> 
>  
> 
> You've got that right my friend! :-)
> 
>  
> 
> On Tue, 2 Sep 2008 00:22:45 +0200, "Christian Victor" said:
> 
>> http://store.variantdistribution.com/category-s/49.htmVariant - one of
> 
>> Rhinos distributors and the only source I was able to find
> 
>> - quotes the card for US$ 700.
> 
>  
> 
> Strange.  I've seen this happen before where retailers will list
> 
> outrageously high prices for soon-to-be-released products.   For example
> 
> the SNOM KlarVoice handset.  MSRP is $32, but I've seen it advertised
> for $200!
> 
>  
> 
> http://www.8774e4voip.com/SearchResults.asp?Search=klarvoice
> 
>  
> 
> I can say with confidence that the LIST price is US $350.  The street
> price will be considerably lower.  Frankly, if I were Snom or Rhino I'd
> be pretty cheezed off about this phenomenon.  After hearing the 'buzz'
> 
> about a new product such as this, I'd hate for customers to *decide*
> against it mistkenly believing this incorrect price.  I'd turn my nose
> at either of these two products for the incorrect prices I've seen
> advertised.
> 
>  
> 
> We're pretty stoked to have stumbled onto this product because it's
> brand new, and we've been looking for something like it for some time.
> 
>  
> 
> -Karl
> 
> 
> ------------------------------------------------------------------------
> 
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
> 
> AstriCon 2008 - September 22 - 25 Phoenix, Arizona
> Register Now: http://www.astricon.net
> 
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>    http://lists.digium.com/mailman/listinfo/asterisk-users



_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

AstriCon 2008 - September 22 - 25 Phoenix, Arizona
Register Now: http://www.astricon.net

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users




More information about the asterisk-users mailing list