[asterisk-users] Congestion in Outgoing call through PRI

[Octavio Ruiz]

On Wed, Sep 3, 2008 at 10:33 AM, Richard Lyman <pchammer at dynx.net> wrote:
> Octavio Ruiz wrote:

>> On Sat, Aug 30, 2008 at 12:17 PM, Shariq Khan <shariqrazakhan at gmail.com> wrote:
>> The output of a
>> CLI>      pri intese debug
>> at Asterisk CLI before make a test call would be very useful, libPRI
>> 1.4.7 is just fine.

> I am amazed no one else have suggested trying a different phone type
> like an IAX2 softphone. (if i am right, this will work)

For me is complete clear that

    -- Zap/1-1 is circuit-busy
    -- Hungup 'Zap/1-1'
  == Everyone is busy/congested at this time (1:0/1/0)

the Zap channel is the one which returns the congestion status, not
the other leg (whatever the technology is).
Anyway, if he try both options nobody is going to be hurt.

I forgot completely mention (and carefully read their  zaptel.conf
configuration and see dchan=16 declared rather than hardhdlc=16 )
that  probably their issue is already solved and documented just right
here: http://wiki.sangoma.com/Asterisk-FAQ#hardhdlc  Shariq, can you
tell us your wanrouter + zaptel version?

-- 
Octavio H. Ruiz Cervera
Tel.: (+52 55) 8590-9000 Ext. 7016
Mobile: (+52 1 55) 14-087790
Mobile: (+52 1 55) 41-351242