[asterisk-users] asterisk+heartbeat

[Edgar Guadamuz]

Are you using bindaddr=0.0.0.0 in sip.conf and iax.conf ??




On Wed, Oct 15, 2008 at 5:35 PM, Steve Totaro <
stotaro at totarotechnologies.com> wrote:

> I had an issue in 1.2.x that I am not sure ever got fixed but having two
> NICs on the same subnet did strange things.  Strange like one NIC would be
> used for outbound traffic and the other for inbound traffic.
>
> Maybe someone knows why, if it was a bug, if it was fixed?
>
> I could think of something creative but am drained right now and have to go
> buy some coax and connectors.
>
> If nobody helps you by then, I will.
>
> Thanks,
> Steve Totaro
>
>
> On Wed, Oct 15, 2008 at 3:39 PM, Gleim, Jason <jgleim at atsautomation.com>wrote:
>
>> How did you define the secondary IP address? Did you actually set that
>> up in the network scripts and bind it to eth0 or did you just define it
>> in /etc/ha.d/haresources? You should only have the virtual IP defined in
>> haresources along with the primary server and what you want to do on
>> node up/down.
>>
>> My haresources file has a single line:
>> ohasterisk01 10.191.32.31 MailTo::<user>@<domain>.com::Asterisk
>> fonulator asterisk
>>
>> We're obviously using the redFone FoneBRIDGE for our T1 connection as
>> you can see we're firing the fonulator script and then asterisk.
>>
>> HTH!
>>
>> Jason
>>
>>
>> > -----Original Message-----
>> > From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-
>> > bounces at lists.digium.com] On Behalf Of Nhadie
>> > Sent: Tuesday, October 14, 2008 12:47 PM
>> > To: Asterisk Users Mailing List - Non-Commercial Discussion
>> > Subject: [asterisk-users] asterisk+heartbeat
>> >
>> > Hi,
>> >
>> > I'm using heartbeat as a failover for my asterisk server.
>> >
>> > on the active server 1 i have
>> >
>> > 10.10.10.1 eth0
>> > 10.10.10.3 secondary eth0
>> >
>> > asterisk listens to the secondary ip, so that if server 1 fails,
>> server
>> > 2 will then get that IP.
>> >
>> > so if server 1 fails, server 2 will have the IP
>> >
>> > 10.10.10.2 eth0
>> > 10.10.10.3 secondary eth0
>> >
>> > problem is i have to bind asterisk to the secondary IP if dont, i cant
>> > make calls. but if server 2 is inactive, asterisk does not run, as on
>> > the config it is binded on the secondary ip.
>> >
>> > anyone uses heartbeat for failover? tia.
>> >
>> > regards,
>> > nhadie
>> >
>>
>>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
-------------- next part --------------
An HTML attachment was scrubbed...
URL: http://lists.digium.com/pipermail/asterisk-users/attachments/20081015/5ee25487/attachment.htm