[asterisk-users] Cisco 7906g & SIP
Sasa
sasa at shoponweb.it
Thu Oct 9 09:46:28 CDT 2008
Hi Dave,
I have tried restore to factory default value (as you have recommended to
me) but without success, however also with only files:
SEP<MAC>.conf file
contents of the cop file
..but the result isn't changed !
Thanks in advance.
------
Salvatore.
----- Original Message -----
From: "David Gibbons" <dave at videon-central.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Thursday, October 09, 2008 2:59 PM
Subject: Re: [asterisk-users] Cisco 7906g & SIP
> Sasa,
>
> Sometimes I have to do a hard reset of the phone in order to get it to
> load the SIP firmware, even when the load file is specified in the
> SEP<MAC>.conf file.
>
> Make sure that only the contents of the cop file and the SEP<mac>.cnf file
> are present in your tftp root. Then unplug the phone and press and hole
> the # key. Plug the phone back in, still holding the # key. When the line
> buttons begin turn on and off in sequence, press 123456789*0#.
>
> This will factory reset the phone and should cause it to check the
> termxx.default.loads file for the proper image. It will then read the SIP
> image name from that file and flash itself with the SIP image.
>
> Dave
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sasa
> Sent: Thursday, October 09, 2008 8:51 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>
> Hi Dave,
> the cmterm-7911_7906-sip.8-0-4sr1.cop is a compressed file and on the
> inside
> has:
>
> apps11.1-1-3-15.sbn
> cnu11.3-1-3-15.sbn
> copstart.sh
> cvm11sip.8-0-3-16.sbn
> dsp11.1-1-3-15.sbn
> jar11sip.8-0-3-16.sbn
> load307
> load369
> SIP11.8-0-4SR1S.loads
> term06.default.loads
> term11.default.loads
>
> I use Cisco7941 without callmanager software but only with SIP support.
> Thanks.
>
> ------
>
> Salvatore.
>
>
>
> ----- Original Message -----
> From: "David Gibbons" <dave at videon-central.com>
> To: "Asterisk Users Mailing List - Non-Commercial Discussion"
> <asterisk-users at lists.digium.com>
> Sent: Thursday, October 09, 2008 2:30 PM
> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>
>
>> Sasa,
>>
>> You can actually just rename the .cop file to a .tar.gz file. Cisco
>> doesn't have (to my knowledge) any non-callmanager SIP software. The SIP
>> load is just a SIP load, not a SIP load unique to generic SIP or
>> callmanager.
>>
>> Dave
>>
>> -----Original Message-----
>> From: asterisk-users-bounces at lists.digium.com
>> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Stefan
>> Gofferje
>> Sent: Thursday, October 09, 2008 7:28 AM
>> To: Asterisk Users Mailing List - Non-Commercial Discussion
>> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>>
>> Sasa schrieb:
>>>> I need other files other than those obtained with
>>>> cmterm-7911_7906-sip.8-0-4sr1.cop ??
>>
>> cmterm is the callmanager software. You need to get the non-callmanager
>> SIP-software. Contact your local Cisco representative to buy a license
>> for that.
>>
>> Terve,
>> Stefan
>>
>> --
>> Last words of a stormchaser:
>> "Where is that rotation on the radar?!"
>>
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>> _______________________________________________
>> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>>
>> asterisk-users mailing list
>> To UNSUBSCRIBE or update options visit:
>> http://lists.digium.com/mailman/listinfo/asterisk-users
>>
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
> http://lists.digium.com/mailman/listinfo/asterisk-users
>
More information about the asterisk-users
mailing list