[asterisk-users] Cisco 7906g & SIP

David Gibbons dave at videon-central.com
Thu Oct 9 07:59:04 CDT 2008


Sasa,

Sometimes I have to do a hard reset of the phone in order to get it to load the SIP firmware, even when the load file is specified in the SEP<MAC>.conf file.

Make sure that only the contents of the cop file and the SEP<mac>.cnf file are present in your tftp root. Then unplug the phone and press and hole the # key. Plug the phone back in, still holding the # key. When the line buttons begin turn on and off in sequence, press 123456789*0#.

This will factory reset the phone and should cause it to check the termxx.default.loads file for the proper image. It will then read the SIP image name from that file and flash itself with the SIP image.

Dave

-----Original Message-----
From: asterisk-users-bounces at lists.digium.com [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Sasa
Sent: Thursday, October 09, 2008 8:51 AM
To: Asterisk Users Mailing List - Non-Commercial Discussion
Subject: Re: [asterisk-users] Cisco 7906g & SIP

Hi Dave,
the cmterm-7911_7906-sip.8-0-4sr1.cop is a compressed file and on the inside
has:

apps11.1-1-3-15.sbn
cnu11.3-1-3-15.sbn
copstart.sh
cvm11sip.8-0-3-16.sbn
dsp11.1-1-3-15.sbn
jar11sip.8-0-3-16.sbn
load307
load369
SIP11.8-0-4SR1S.loads
term06.default.loads
term11.default.loads

I use Cisco7941 without callmanager software but only with SIP support.
Thanks.

------

   Salvatore.



----- Original Message -----
From: "David Gibbons" <dave at videon-central.com>
To: "Asterisk Users Mailing List - Non-Commercial Discussion"
<asterisk-users at lists.digium.com>
Sent: Thursday, October 09, 2008 2:30 PM
Subject: Re: [asterisk-users] Cisco 7906g & SIP


> Sasa,
>
> You can actually just rename the .cop file to a .tar.gz file. Cisco
> doesn't have (to my knowledge) any non-callmanager SIP software. The SIP
> load is just a SIP load, not a SIP load unique to generic SIP or
> callmanager.
>
> Dave
>
> -----Original Message-----
> From: asterisk-users-bounces at lists.digium.com
> [mailto:asterisk-users-bounces at lists.digium.com] On Behalf Of Stefan
> Gofferje
> Sent: Thursday, October 09, 2008 7:28 AM
> To: Asterisk Users Mailing List - Non-Commercial Discussion
> Subject: Re: [asterisk-users] Cisco 7906g & SIP
>
> Sasa schrieb:
>>> I need other files other than those obtained with
>>> cmterm-7911_7906-sip.8-0-4sr1.cop ??
>
> cmterm is the callmanager software. You need to get the non-callmanager
> SIP-software. Contact your local Cisco representative to buy a license
> for that.
>
> Terve,
> Stefan
>
> --
> Last words of a stormchaser:
> "Where is that rotation on the radar?!"
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>


_______________________________________________
-- Bandwidth and Colocation Provided by http://www.api-digital.com --

asterisk-users mailing list
To UNSUBSCRIBE or update options visit:
   http://lists.digium.com/mailman/listinfo/asterisk-users



More information about the asterisk-users mailing list