[asterisk-users] 2 Asterisks to one PBX - E1 conection

[Steve Totaro]

Redfone

On Wed, Nov 26, 2008 at 4:04 PM, dubravko caric
<dubravko_caric at yahoo.com> wrote:
> Hi all,
>
> I have a question regarding connection of two Asterisk servers to our PBX.
> Each Asterisk server has one PCI E1 card, and they are in failover mode with
> Linux HA. On our PBX we have only one E1 card towards Asterisk servers.
>
> My question is how to connect these two Asterisks to one E1 card on PBX, and
> when primary Asterisk server fails not to have to manually pull out E1 cable
> from primary server and plug it in secondary server in order to have active
> connection to E1 card on PBX.
>
> Is there some kind of splitter which, on one side can accept two E1
> connections from Asterisks and on the other side one E1 link from PBX. This
> splitter must also recognize towards which one of two E1 links on Asterisk
> side it should send signals to. eg. when primary Asterisk fails this
> splitter should send signals to its eg. port 2 (connection towards secondary
> Asterisk).
>
> I would be most grateful if someone could provide me with a link to such
> products.
>
> Thanks
>
> Dubravko
>
>
> _______________________________________________
> -- Bandwidth and Colocation Provided by http://www.api-digital.com --
>
> asterisk-users mailing list
> To UNSUBSCRIBE or update options visit:
>   http://lists.digium.com/mailman/listinfo/asterisk-users
>



-- 
Thanks,
Steve Totaro
+18887771888 (Toll Free)
+12409381212 (Cell)
+12024369784 (Skype)