[asterisk-users] ztdummy: rtc: lost some interrupts at 1024Hz

[Giorgio Incantalupo]

Hi JR,

Tried with another motherboard: it works!!
Tried with Asterisk 1.2 and 1.4: it works!!

I cannot still believe....it works...IT WORKS!!!

Need to make some other tests with other kernels/machines/cards but I'm 
sure this is the right way!

Thank you thank you thank you!!!  ::-))

Giorgio.


JR Richardson wrote:
>> I'm getting crazy about ztdummy. I have to replicate a PBX where ztdummy
>> is working fine but for some reason I cannot.
>> The two machines have the same kernel, motherboard, the same gcc version
>> and the same zaptel 1.4.8. On the second machine zaptel compiles without
>> errors and ztdummy.ko is generated but when I modprobe it I get the
>> following error in messages:
>> rtc: lost some interrupts at 1024Hz.
>> Since modules sizes are slighly different I copied the working ztdummy
>> on the new machine so the files are the same.....nothing changes!!
>>
>>     
> Your mother boards are probably not 100% the same, maybe a chipset is
> newer and causing an interrupt problem.  I've seen this before.  Put
> 'acpi=off' in your kernel boot parameter line in the grub menu.lst
> like this:
>
> title           Debian GNU/Linux, kernel 2.6.18-686
> root            (hd0,0)
> kernel          /boot/vmlinuz-2.6.18--686 root=/dev/sda1 ro acpi=off
> initrd          /boot/initrd.img-2.6.18-686
> savedefault
>
> Reboot, and that should do it.
>
> JR
>